
Disclaimer
How to change right engine mounts on PEUGEOT 308 SW I Box Body / Estate (4E_) – replacement guide
downloads:
3
Views:
35
Important!
This replacement procedure can be used for:
PEUGEOT 308 SW I Box Body / Estate (4E_) 1.6 HDi … View more
The steps may slightly vary depending on the car design.
PEUGEOT 308 SW I Box Body / Estate (4E_) 1.6 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for 308 SW I Box Body / Estate (4E_) and other PEUGEOT models
Engine mount
Alternative products

Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Replacement: engine mounts – PEUGEOT 308 SW I Kasten / Kombi (4E_). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: engine mounts – PEUGEOT 308 SW I Kasten / Kombi (4E_). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Release the coolant reservoir retainers. Use a clip removal tool.
- Step 4Remove the coolant reservoir cap.
- Step 5Remove the engine cover.AUTODOC recommends:Replacement: engine mounts – PEUGEOT 308 SW I Kasten / Kombi (4E_). Do not use excessive force when removing the part as this may damage it.
- Step 6Support the engine in the oil pan area. Use a jack.
- Step 7Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
- Step 8Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench.
- Step 9Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench.
- Step 10Remove the engine mount.Replacement: engine mounts – PEUGEOT 308 SW I Kasten / Kombi (4E_). AUTODOC recommends:Carefully check the other engine mounts and replace them if necessary.
- Step 11Remove the fastening bolts.
- Step 12Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
- Step 13Treat the engine mount fasteners. Use a sealant.
- Step 14Install the engine mount to its mounting seat.
- Step 15Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 308 SW I Box Body / Estate (4E_) model
Popular maintenance tutorials for PEUGEOT 308 SW I Kasten / Kombi (4E_)
Complete guides for changing the Engine mounts on different PEUGEOT 308 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 308 SW I Box Body / Estate (4E_)
View more
- How to choose the right engine oil for your car | AUTODOC
- When, why, and how to change engine oil | AUTODOC tips
- 5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
- DIY manual gearbox restoration | Drivetrain restoration – Part 3
Most commonly replaced car parts on PEUGEOT 308
Time to replace parts? Get even better deals in our Shop app.

SCAN ME