
Disclaimer
How to change right engine mounts on OPEL Vivaro A Platform / Chassis (X83) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
OPEL Vivaro A Platform / Chassis (X83) 2.5 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.5 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.0 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.0 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.5 DTi … View more
The steps may slightly vary depending on the car design.
OPEL Vivaro A Platform / Chassis (X83) 2.5 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.5 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.0 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.0 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.5 DTi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for Vivaro A Platform / Chassis (X83) and other OPEL models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Torque wrench
18 mm socket
24 mm socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Car lift or jack with jack stands, and wheel chocks
Replacement: engine mounts – OPEL VIVARO Platform/Chassis (E7). AUTODOC recommends:
- All the work should be carried out with the ignition switched off.
Replacement: engine mounts – OPEL VIVARO Platform/Chassis (E7). Use the following procedure:
- Step 1Raise the vehicle or place it over an inspection pit.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.Step 2
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 3
Unscrew the fastener that connects the engine mount to the engine mount bracket. Use a 24 mm socket. Use a ratchet wrench. - Step 4
Unscrew the fastener that connects the engine mount to the subframe. Use an 18 mm socket. Use a ratchet wrench. - Step 5
Remove the fastening bolts. - Step 6
Remove the engine mount.Replacement: engine mounts – OPEL VIVARO Platform/Chassis (E7). AUTODOC experts recommend:Carefully inspect the other engine mounts and replace them if necessary. - Step 7
Clean the mounting seats of the engine mount. Use a wire brush. Use an all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Vivaro A Platform / Chassis (X83) model
Popular maintenance tutorials for OPEL VIVARO Platform/Chassis (E7)
Complete guides for changing the Engine mounts on different OPEL VIVARO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Vivaro A Platform / Chassis (X83)
View more
Cold starts | 5 mistakes that wreck your car
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
DIY engine block coffee table
5 tools that make car repair incredibly simple | AUTODOC tips
Most commonly replaced car parts on OPEL VIVARO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




















