
Disclaimer
How to change right engine mounts on Opel Vivaro A van – replacement guide
downloads:
0
Views:
1
Important!
This replacement procedure can be used for:
OPEL Vivaro A Combi (X83) 2.5 DTI (F7, J7, A07), OPEL Vivaro A Combi (X83) 2.0 CDTI (F7, J7, A07), OPEL Vivaro A Combi (X83) 2.0 CDTI (F7, J7, A07), OPEL Vivaro A Combi (X83) 2.5 CDTI (F7, J7, A07), OPEL Vivaro A Combi (X83) 2.5 CDTI (F7, J7, A07) … View more
The steps may slightly vary depending on the car design.
OPEL Vivaro A Combi (X83) 2.5 DTI (F7, J7, A07), OPEL Vivaro A Combi (X83) 2.0 CDTI (F7, J7, A07), OPEL Vivaro A Combi (X83) 2.0 CDTI (F7, J7, A07), OPEL Vivaro A Combi (X83) 2.5 CDTI (F7, J7, A07), OPEL Vivaro A Combi (X83) 2.5 CDTI (F7, J7, A07) … View more
The steps may slightly vary depending on the car design.
How to change a lower engine mount on OPEL VIVARO A Van [AUTODOC TUTORIAL]

All the parts you need to replace – Engine Mount for Vivaro A Combi (X83) and other OPEL models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Torque wrench
18 mm socket
24 mm socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Car lift or jack with jack stands, and wheel chocks
Replacement: engine mounts – Opel Vivaro A van. AUTODOC recommends:
- All the work should be carried out with the ignition switched off.
Replacement: engine mounts – Opel Vivaro A van. Use the following procedure:
- Step 1
Raise the vehicle or place it over an inspection pit.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands. - Step 2
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 3
Unscrew the fastener that connects the engine mount to the engine mount bracket. Use a 24 mm socket. Use a ratchet wrench. - Step 4
Unscrew the fastener that connects the engine mount to the subframe. Use an 18 mm socket. Use a ratchet wrench. - Step 5
Remove the fastening bolts. - Step 6
Remove the engine mount.Replacement: engine mounts – Opel Vivaro A van. AUTODOC experts recommend:Carefully inspect the other engine mounts and replace them if necessary. - Step 7
Clean the mounting seats of the engine mount. Use a wire brush. Use an all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Vivaro A Combi (X83) model
Popular maintenance tutorials for Opel Vivaro A Combi
Complete guides for changing the Engine mounts on different OPEL VIVARO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Vivaro A Combi (X83)
View more
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
How to get your motorcycle ready for spring
How to remove scratches from car plastic | AUTODOC tips
CHECK ENGINE light turned on – step-by-step guide on what to do
Most commonly replaced car parts on OPEL VIVARO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















