
How to change right engine mounts on OPEL Vivaro A Van (X83) – replacement guide
OPEL Vivaro A Van (X83) 2.5 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 DTI (F7) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle

- All the work should be carried out with the ignition switched off.
- Step 1
Raise the vehicle or place it over an inspection pit.
Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
Step 2
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
- Step 3

Unscrew the fastener that connects the engine mount to the engine mount bracket. Use a 24 mm socket. Use a ratchet wrench.
- Step 4

Unscrew the fastener that connects the engine mount to the subframe. Use an 18 mm socket. Use a ratchet wrench.
- Step 5

Remove the fastening bolts.
- Step 6

Remove the engine mount.
Replacement: engine mounts – OPEL VIVARO Box (F7). AUTODOC experts recommend:Carefully inspect the other engine mounts and replace them if necessary.
- Step 7

Clean the mounting seats of the engine mount. Use a wire brush. Use an all-purpose cleaning spray.
Find out which tyre and wheel sizes are compatible with the OPEL Vivaro A Van (X83) model
Popular maintenance tutorials for Opel Vivaro Van
Complete guides for changing the Engine mounts on different OPEL VIVARO models
Track expenses, manage logs, schedule replacements, and more.
How to replace a timing chain yourself
Top 7 signs of a bad starter
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
Checking the starter without removing it | AUTODOC tips
Most commonly replaced car parts on OPEL VIVARO

























