
Disclaimer
How to change rear wheel bearing on RENAULT MEGANE Scenic (JA0/1_) – replacement guide
downloads:
1
Views:
11
Important!
This replacement procedure can be used for:
RENAULT MEGANE Scenic (JA0/1_) 1.4 i (JA0E), RENAULT MEGANE Scenic (JA0/1_) 1.6 e (JA0F), RENAULT MEGANE Scenic (JA0/1_) 2.0 i (JA0G), RENAULT MEGANE Scenic (JA0/1_) 1.9 dT (JA0K, JA0Y), RENAULT MEGANE Scenic (JA0/1_) 1.9 D (JA0J), RENAULT MEGANE Scenic (JA0/1_) 1.9 dTi (JA0N), RENAULT MEGANE Scenic (JA0/1_) 1.6 16V (JA0B, JA04, JA11, JA00), RENAULT MEGANE Scenic (JA0/1_) 2.0 i (JA02, JA0G) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE Scenic (JA0/1_) 1.4 i (JA0E), RENAULT MEGANE Scenic (JA0/1_) 1.6 e (JA0F), RENAULT MEGANE Scenic (JA0/1_) 2.0 i (JA0G), RENAULT MEGANE Scenic (JA0/1_) 1.9 dT (JA0K, JA0Y), RENAULT MEGANE Scenic (JA0/1_) 1.9 D (JA0J), RENAULT MEGANE Scenic (JA0/1_) 1.9 dTi (JA0N), RENAULT MEGANE Scenic (JA0/1_) 1.6 16V (JA0B, JA04, JA11, JA00), RENAULT MEGANE Scenic (JA0/1_) 2.0 i (JA02, JA0G) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for MEGANE Scenic (JA0/1_) and other RENAULT models
Wheel bearing kit
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #19
Rubber mallet
Tap wrench
Hammer
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT MEGANE Scenic (JA0/1_). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your RENAULT MEGANE Scenic (JA0/1_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – RENAULT MEGANE Scenic (JA0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE Scenic (JA0/1_)
- Step 5Remove the wheel.
- Step 6Clean the brake drum. Use a wire brush. Use WD-40 spray.
- Step 7Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT MEGANE Scenic (JA0/1_). Professionals recommend:Some cars are not equipped with wheel hub caps.
- Step 8Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
- Step 9Remove the brake drum assembled with the wheel hub bearing.
- Step 10Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane Scenic (JA) model
Popular maintenance tutorials for Renault Megane Scenic
Complete guides for changing the Wheel bearings on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE Scenic (JA0/1_)
View more
- How I started restoring a driveshaft | Drivetrain restoration – Part 1
- Kolbenschmidt plastic gauge overview
- How to get your motorcycle ready for spring
- DIY rear axle restoration | Drivetrain restoration – Part 2
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME