
Disclaimer
How to change front anti roll bar links on RENAULT Megane Scenic (JA) – replacement guide
downloads:
2
Views:
55
Important!
This replacement procedure can be used for:
RENAULT MEGANE Scenic (JA0/1_) 1.4 i (JA0E), RENAULT MEGANE Scenic (JA0/1_) 1.6 i (JA0L), RENAULT MEGANE Scenic (JA0/1_) 1.6 e (JA0F), RENAULT MEGANE Scenic (JA0/1_) 2.0 i (JA0G), RENAULT MEGANE Scenic (JA0/1_) 1.9 dT (JA0K, JA0Y), RENAULT MEGANE Scenic (JA0/1_) 1.9 D (JA0J), RENAULT MEGANE Scenic (JA0/1_) 1.9 dTi (JA0N), RENAULT MEGANE Scenic (JA0/1_) 1.6 16V (JA0B, JA04, JA11, JA00), RENAULT MEGANE Scenic (JA0/1_) 2.0 i (JA02, JA0G) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE Scenic (JA0/1_) 1.4 i (JA0E), RENAULT MEGANE Scenic (JA0/1_) 1.6 i (JA0L), RENAULT MEGANE Scenic (JA0/1_) 1.6 e (JA0F), RENAULT MEGANE Scenic (JA0/1_) 2.0 i (JA0G), RENAULT MEGANE Scenic (JA0/1_) 1.9 dT (JA0K, JA0Y), RENAULT MEGANE Scenic (JA0/1_) 1.9 D (JA0J), RENAULT MEGANE Scenic (JA0/1_) 1.9 dTi (JA0N), RENAULT MEGANE Scenic (JA0/1_) 1.6 16V (JA0B, JA04, JA11, JA00), RENAULT MEGANE Scenic (JA0/1_) 2.0 i (JA02, JA0G) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for MEGANE Scenic (JA0/1_) and other RENAULT models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Torx bit T45
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on RENAULT MEGANE Scenic (JA0/1_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – RENAULT MEGANE Scenic (JA0/1_). Use the following procedure:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: anti roll bar links – RENAULT MEGANE Scenic (JA0/1_). Tip from AUTODOC experts:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the stabilizer rod fasteners. Use a drive socket #13. Use a ratchet wrench.
- Step 8Remove the stabilizer rod.Replacement: anti roll bar links – RENAULT MEGANE Scenic (JA0/1_). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed.
- Step 9Clean all joints of the stabiliser link. Use a wire brush. Treat all joints of the stabiliser link. Use WD-40 spray.
- Step 10Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane Scenic (JA) model
Popular maintenance tutorials for Renault Megane Scenic
Complete guides for changing the Drop links on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE Scenic (JA0/1_)
View more
- How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
- The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
- Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
- How to Order Car Parts Online: Avoid These 5 Common Pitfalls
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME