Important!
This replacement procedure can be used for:
AUDI Cabriolet (8G7, B4) 2.0 E, AUDI Cabriolet (8G7, B4) 2.6, AUDI Cabriolet (8G7, B4) 2.8, AUDI Cabriolet (8G7, B4) 1.9 TDI, AUDI Cabriolet (8G7, B4) 1.8 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel bearing – AUDI CABRIOLET (8G7, B4). Tools you need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #15
Drive socket # 13
Drive socket # 24
HEX bit No.H8
Wheel impact socket #17
Ratchet wrench
Bush and bearing driver set
Flat screwdriver
Rubber mallet
Tap wrench
Hammer
Hub slide hammer puller
Universal puller
Crow bar
Wheel chock
AUTODOC recommends:
  • Do not re-use the bearing assembly of your AUDI CABRIOLET (8G7, B4) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – AUDI CABRIOLET (8G7, B4) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on Audi Cabriolet 8g7 b4 1991 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace AUDI Cabriolet (8G7, B4) 2.3 E 1992 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI CABRIOLET (8G7, B4)
  3. Step 5
    Audi Cabriolet 8g7 b4 2.0 E 1993 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on AUDI Cabriolet (8G7, B4) 1.8 1994 by yourself
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove AUDI CABRIOLET 1.9 TDI 1995 Wheel Bearing - online easy-to-follow instructions
    Unscrew the brake caliper fastening. Use a combination spanner #15. Use a drive socket #13. Use a ratchet wrench.
  6. Step 8
    How to replace Wheel Bearing on AUDI Cabriolet (8G7, B4) 1996: download PDF manuals and video instructions
    Remove the brake caliper. Use a crowbar.
    Replacement: wheel bearing – AUDI CABRIOLET (8G7, B4). Professionals recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Audi Cabriolet 8g7 b4 2.0 16V 1997 - download illustrated guide
    Remove the brake pads.
  8. Step 10
    Need to know how to renew Wheel Bearing on AUDI CABRIOLET 1998? This free workshop manual will help you to do it yourself
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Wheel Bearing on Audi Cabriolet 8g7 b4 1999 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the caliper bracket fastening. Use HEX No.H8. Use a ratchet wrench. Use a tap wrench.
  10. Step 12
    AUDI CABRIOLET 2.0 E Wheel Bearing replacement: online guides and video tutorials
    Remove the caliper bracket.
  11. Step 13
    Replacing Wheel Bearing on Audi Cabriolet 8g7 b4 1991 2.3 E by yourself
    Clean the brake disc fastener. Use a wire brush. Use WD-40 spray.
  12. Step 14
    Cabriolet (8G7, B4) 1.9 TDI 1992 Wheel Bearing DIY replacement workshop manual
    Remove the wheel hub nut cap. Use a hammer. Use a crowbar.
  13. Step 15
    How to change Wheel Bearing on AUDI Cabriolet (8G7, B4) 1993 - tips and tricks
    Remove the cotter pin securing the hub nut. Use a crowbar. Use a flat screwdriver.
  14. Step 16
    Step-by-step recommendations for DIY replacement Audi Cabriolet 8g7 b4 1994 1.9 TDI Wheel Bearing
    Unscrew the hub nut. Use a drive socket #24. Use a tap wrench.
  15. Step 17
    DIY replacement of Wheel Bearing on AUDI Cabriolet (8G7, B4) 2.6 1995 is not an issue anymore with our step-by-step tutorial
    Remove the brake disc assemled with the wheel hub bearing. Use a crowbar.
  16. Step 18
    How to change Wheel Bearing on Audi Cabriolet 8g7 b4 1991 - free PDF and video manuals
    Clean the stub axle. Use a wire brush. Use all-purpose cleaning spray.
  17. Step 19
    How to replace AUDI Cabriolet (8G7, B4) 2.3 E 1992 Wheel Bearing - step-by-step manuals and video guides
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  18. Step 20
    Audi Cabriolet 8g7 b4 2.0 E 1993 Wheel Bearing replacement: free workshop manuals
    Press out the wheel hub bearing. Use a bush and bearing driver set. Use a hammer.
  19. Step 21
    Changing Wheel Bearing on AUDI Cabriolet (8G7, B4) 1.8 1994 by yourself
    Remove the bearing inner race from the wheel hub. Remove the inner oil seal of the wheel bearing. Use a universal puller. Use the hub slide hammer puller.
  20. Step 22
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
    Step 23
    How to remove AUDI CABRIOLET 1.9 TDI 1995 Wheel Bearing - online easy-to-follow instructions
    Press fit the new wheel hub bearing into the brake disc. Use a bush and bearing driver set. Use a hammer.
    Replacement: wheel bearing – AUDI CABRIOLET (8G7, B4). Tip:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  21. Step 24
    How to replace Wheel Bearing on AUDI Cabriolet (8G7, B4) 1996: download PDF manuals and video instructions
    Install the inner race of the wheel bearing into the hub. Use a bush and bearing driver set. Use a hammer.
  22. Step 25
    How hard is it to do yourself: Wheel Bearing replacement on Audi Cabriolet 8g7 b4 2.0 16V 1997 - download illustrated guide
    Treat the wheel hub bearing. Use a multipurpose grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Cabriolet B4 (8G7) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI Cabriolet (8G7, B4) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI Cabriolet (8G7, B4) Wheel Bearing replacement - online guide
Tips & tricks for your AUDI Cabriolet (8G7, B4)
View more
  • How to change Wheel bearings on AUDI Cabriolet (8G7, B4) 2.6 - replacement tricks
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Changing Hub bearing Audi Cabriolet 8g7 b4 2.3 E - Replacement Tips
    How to replace a wheel stud | AUTODOC tips
  • Maintenance Hacks - AUDI Cabriolet (8G7, B4) 2.0 E Wheel bearing kit replacement guide
    Things you should never do with an automatic transmission | AUTODOC tips
  • Replace Wheel hub bearing on Audi Cabriolet 8g7 b4 - free video tips
    How to shine your tyres | AUTODOC tips

Professional manuals for the most common AUDI models