How to carry out replacement: Track Rod End 2.3 E Audi Cabriolet 8g7 b4
Disclaimer
Change Audi Cabriolet 8g7 b4 2.0 E Track Rod End yourself – manuals and video tutorials

How to change track rod end on AUDI Cabriolet B4 (8G7) – replacement guide

downloads: 4
Views: 27
Download your free tutorial and fix AUDI Cabriolet (8G7, B4) 2.3 E problems yourself Download for free 2.2 MB Track Rod End for Audi Cabriolet 8g7 b4 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
AUDI Cabriolet (8G7, B4) 2.0 E, AUDI Cabriolet (8G7, B4) 2.3 E, AUDI Cabriolet (8G7, B4) 2.6, AUDI Cabriolet (8G7, B4) 2.8, AUDI Cabriolet (8G7, B4) 2.0 16V, AUDI Cabriolet (8G7, B4) 1.9 TDI, AUDI Cabriolet (8G7, B4) 1.8 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Cabriolet (8G7, B4) and other AUDI models
Alternative products
How to change Track rod end on Audi Cabriolet 8g7 b4 2.3 E – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – AUDI CABRIOLET (8G7, B4). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Combination spanner #14
Combination spanner #22
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Ball joint puller
Vernier caliper
Wheel chock
Buy tools
Replacement: track rod end – AUDI CABRIOLET (8G7, B4). AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – AUDI CABRIOLET (8G7, B4) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on Audi Cabriolet 8g7 b4 1991 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI Cabriolet (8G7, B4) 2.3 E 1992 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Audi Cabriolet 8g7 b4 2.0 E 1993 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI CABRIOLET (8G7, B4)
  4. Step 5
    Changing Track Rod End on AUDI Cabriolet (8G7, B4) 1.8 1994 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI CABRIOLET 1.9 TDI 1995 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 7
    Clean all tie rod end connections. Use a wire brush. Use WD-40 spray.
    Step 8
    How to replace Track Rod End on AUDI Cabriolet (8G7, B4) 1996: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on Audi Cabriolet 8g7 b4 2.0 16V 1997 - download illustrated guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  8. Step 10
    Need to know how to renew Track Rod End on AUDI CABRIOLET 1998? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #14. Use a combination spanner #22.
  9. Step 11
    Changing of Track Rod End on Audi Cabriolet 8g7 b4 1999 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
    Step 13
    AUDI CABRIOLET 2.0 E Track Rod End replacement: online guides and video tutorials
    Screw on a new tie rod end.
    Replacement: track rod end – AUDI CABRIOLET (8G7, B4). Tip from AUTODOC experts:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Cabriolet B4 (8G7) model

Audi Cabriolet 8g7 b4 tyre size

Popular maintenance tutorials for Audi Cabriolet 8g7 b4

More manuals for Audi Cabriolet 8g7 b4

Complete guides for changing the Tie rod end on different AUDI CABRIOLET models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI Cabriolet (8G7, B4) Track Rod End replacement - online guide
Tips & tricks for your AUDI Cabriolet (8G7, B4)
View more
  • How to change Tie rod end on AUDI Cabriolet (8G7, B4) 2.6 - replacement tricks
    How to remove rust | AUTODOC tips
    27K views
    Published on: 16/09/2021
  • Changing Outer tie rod Audi Cabriolet 8g7 b4 2.3 E - Replacement Tips
    5 possible reasons why your car heater isn't working
    6K views
    Published on: 21/11/2024
  • Maintenance Hacks - AUDI Cabriolet (8G7, B4) 2.0 E Track rod end ball joint replacement guide
    Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
    10K views
    Published on: 08/04/2021
  • Replace Outer tie rod end on Audi Cabriolet 8g7 b4 - free video tips
    How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
    5K views
    Published on: 16/05/2024

Most commonly replaced car parts on AUDI CABRIOLET

Professional manuals for the most common AUDI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI Cabriolet (8G7, B4) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME