How to carry out replacement: Control Arm 1.5 dCi Nissan Qashqai j10
Disclaimer
Change Nissan Qashqai j10 2.0 dCi Allrad Control Arm yourself – manuals and video tutorials

How to change rear suspension lower control arm on Nissan Qashqai J10 – replacement guide

downloads: 64
Views: 1286
Download your free tutorial and fix NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi problems yourself Download for free 1.84 MB Control Arm for Nissan Qashqai j10 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 LPG, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 … View more

The steps may slightly vary depending on the car design.

How to change rear suspension arm on NISSAN QASHQAI Saloon [TUTORIAL AUTODOC]

video
Published on: 04/09/2020
17K views
All the parts you need to replace – Control Arm for Qashqai / Qashqai +2 I (J10, NJ10) and other NISSAN models
Alternative products
How to change Suspension arm on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: rear suspension lower control arm – Nissan Qashqai J10. Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #18
Combination spanner #21
Drive socket # 18
Drive socket # 21
Wheel impact socket #21
Ratchet wrench
Hammer
Pin punch
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: rear suspension lower control arm – Nissan Qashqai J10. Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • Please note: all work on the car – Nissan Qashqai J10 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on Nissan Qashqai j10 2006 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  2. Step 3
    How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Control Arm - step-by-step manuals and video guides
    Raise the rear of the car and secure on supports.
  3. Step 4
    Nissan Qashqai j10 2.0 dCi Allrad 2008 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower control arm – Nissan Qashqai J10. AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN QASHQAI 1.6 dCi 2010 Control Arm - online easy-to-follow instructions
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Control Arm on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2011: download PDF manuals and video instructions
    Make a mark on the camber adjustment bolt.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Nissan Qashqai j10 2.0 Allrad 2012 - download illustrated guide
    Unscrew the fastener connecting the control arm to the rear subframe. Use a combination spanner #21. Use a drive socket #21. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Control Arm on NISSAN QASHQAI 2013? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #18. Use a drive socket #21. Use a ratchet wrench.
  9. Step 10
    Changing of Control Arm on Nissan Qashqai j10 2006 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use a drive socket #18. Use a ratchet wrench.
  10. Step 11
    NISSAN QASHQAI 2.0 dCi Allrad Control Arm replacement: online guides and video tutorials
    Support the arm. Use a hydraulic transmission jack.
  11. Step 12
    Replacing Control Arm on Nissan Qashqai j10 2008 1.5 dCi by yourself
    Remove the fastening bolt. Use a pin punch. Use a hammer.
  12. Step 13
    Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi 2009 Control Arm DIY replacement workshop manual
    Remove the fastening bolt.
  13. Step 14
    How to change Control Arm on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2010 - tips and tricks
    Remove the arm.
  14. Step 15
    Step-by-step recommendations for DIY replacement Nissan Qashqai j10 2011 1.6 dCi Control Arm
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  15. Step 16
    DIY replacement of Control Arm on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 2012 is not an issue anymore with our step-by-step tutorial
    Install a new arm.
  16. Step 17
    How to change Control Arm on Nissan Qashqai j10 2006 - free PDF and video manuals
    Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Qashqai / Qashqai+2 I (J10, NJ10) model

Nissan Qashqai j10 tyre size

Popular maintenance tutorials for Nissan Qashqai j10

More manuals for Nissan Qashqai j10

Complete guides for changing the Control arm on different NISSAN QASHQAI models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Control Arm replacement - online guide
Tips & tricks for your NISSAN Qashqai / Qashqai +2 I (J10, NJ10)
View more
  • How to change Control arm on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 - replacement tricks
    What to do if your car’s bonnet won’t open | AUTODOC tips
    18K views
    Published on: 12/09/2024
  • Changing Wishbone Nissan Qashqai j10 1.5 dCi - Replacement Tips
    How to restore a steering wheel | AUTODOC tips
    63K views
    Published on: 17/02/2022
  • Maintenance Hacks - NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad Control arms replacement guide
    How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
    5K views
    Published on: 04/07/2021
  • Replace Trailing arm on Nissan Qashqai j10 - free video tips
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
    8K views
    Published on: 16/12/2021

Most commonly replaced car parts on NISSAN QASHQAI

Professional manuals for the most common NISSAN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME