When to replace the Brake Pads on your NISSAN QASHQAI
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 LPG, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 View more

The steps may slightly vary depending on the car design.

How to change front brake pads / brake pad set on NISSAN QASHQAI (J10, NJ10) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Brake Pads for Qashqai / Qashqai +2 I (J10, NJ10) and other NISSAN models
Tools
Replacement: brake pads – Nissan Qashqai J10. Tools you might need:
Wire brush
Nylon cleaning brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Anti-squeal paste
Copper grease
Torque wrench
Combination spanner #17
Drive socket # 14
Wheel impact socket #21
Ratchet wrench
Brake caliper wind back tool
Crow bar
Wheel chock
Replacement: brake pads – Nissan Qashqai J10. Tip from AUTODOC experts:
  • Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
  • The replacement procedure is identical for all brake pads on the same axle.
  • All work should be done with the engine stopped.
Replacement: brake pads – Nissan Qashqai J10. Take the following steps:
  1. Step 1
    How to change Brake Pads on Nissan Qashqai j10 2006 - free PDF and video manuals
    Open the bonnet. Unscrew the brake fluid reservoir cap.
  2. Step 2
    Secure the wheels with chocks.
    Step 3
    How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Brake Pads - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 4
    Nissan Qashqai j10 2.0 dCi Allrad 2008 Brake Pads replacement: free workshop manuals
    Raise the front of the car and secure on supports.
  4. Step 5
    Changing Brake Pads on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Nissan Qashqai J10
  5. Step 6
    How to remove NISSAN QASHQAI 1.6 dCi 2010 Brake Pads - online easy-to-follow instructions
    Remove the wheel.
  6. Step 7
    How to replace Brake Pads on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2011: download PDF manuals and video instructions
    Spread the brake pads. Use a crowbar.
  7. Step 8
    How hard is it to do yourself: Brake Pads replacement on Nissan Qashqai j10 2.0 Allrad 2012 - download illustrated guide
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Brake Pads on NISSAN QASHQAI 2013? This free workshop manual will help you to do it yourself
    Unscrew the brake caliper fastening. Use a combination spanner #17. Use a drive socket #14. Use a ratchet wrench.
  9. Step 10
    Changing of Brake Pads on Nissan Qashqai j10 2006 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake caliper.
    Replacement: brake pads – Nissan Qashqai J10. Professionals recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  10. Step 11
    NISSAN QASHQAI 2.0 dCi Allrad Brake Pads replacement: online guides and video tutorials
    Remove the brake pads. Use a crowbar.
    AUTODOC recommends:
    Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
  11. Step 12
    Replacing Brake Pads on Nissan Qashqai j10 2008 1.5 dCi by yourself
    Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use all-purpose cleaning spray.
  12. Step 13
    Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi 2009 Brake Pads DIY replacement workshop manual
    Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
    Replacement: brake pads – Nissan Qashqai J10. Tip:
    Make sure the disc surface is clean before installing the pads.
  13. Step 14
    How to change Brake Pads on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2010 - tips and tricks
    Install new brake pads.
    Replacement: brake pads – Nissan Qashqai J10. AUTODOC recommends:
    Make sure the pads are installed with linings facing the disc.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Brake Pads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Brake Pads replacement - online guide
Tips & tricks for your NISSAN Qashqai / Qashqai +2 I (J10, NJ10)
View more
  • How to change Brake pad set on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 - replacement tricks
    How to unlock your car without a key | AUTODOC tips
  • Changing Disc pads Nissan Qashqai j10 1.5 dCi - Replacement Tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Maintenance Hacks - NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad Brake pad kit replacement guide
    Top 5 mistakes when working in the engine bay | AUTODOC tips
  • Replace Disc brake pads on Nissan Qashqai j10 - free video tips
    Replacing your engine cooling fan | AUTODOC tips