How to carry out replacement: Control Arm 1.6 CVTC NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E)
Disclaimer
Change NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Control Arm yourself – manuals and video tutorials

How to change rear suspension lower control arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) – replacement guide

downloads: 5
Views: 71
Download your free tutorial and fix NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC problems yourself Download for free 1.78 MB Control Arm for NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 dCi, NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Allrad, NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0, NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for Qashqai / Qashqai+2 I Van (J10, JJ10E) and other NISSAN models
Alternative products
How to change Suspension arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: rear suspension lower control arm – NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E). Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #18
Combination spanner #21
Drive socket # 18
Drive socket # 21
Wheel impact socket #21
Ratchet wrench
Hammer
Pin punch
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: rear suspension lower control arm – NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E). Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • Please note: all work on the car – NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2006 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC 2007 Control Arm - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: rear suspension lower control arm – NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 2008 Control Arm replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Control Arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.5 dCi 2009 by yourself
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove NISSAN QASHQAI 1.6 dCi 2010 Control Arm - online easy-to-follow instructions
    Make a mark on the camber adjustment bolt.
  6. Step 8
    How to replace Control Arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2011: download PDF manuals and video instructions
    Unscrew the fastener connecting the control arm to the rear subframe. Use a combination spanner #21. Use a drive socket #21. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Control Arm replacement on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 dCi Allrad 2012 - download illustrated guide
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #18. Use a drive socket #21. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Control Arm on NISSAN QASHQAI 2013? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use a drive socket #18. Use a ratchet wrench.
  9. Step 11
    Changing of Control Arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2014 won't be an issue if you follow this illustrated step-by-step guide
    Support the arm. Use a hydraulic transmission jack.
  10. Step 12
    NISSAN QASHQAI 2.0 Control Arm replacement: online guides and video tutorials
    Remove the fastening bolt. Use a pin punch. Use a hammer.
  11. Step 13
    Replacing Control Arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2007 1.6 CVTC by yourself
    Remove the fastening bolt.
  12. Step 14
    Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 dCi 2008 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 15
    How to change Control Arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2009 - tips and tricks
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  14. Step 16
    Step-by-step recommendations for DIY replacement NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2010 1.6 dCi Control Arm
    Install a new arm.
  15. Step 17
    DIY replacement of Control Arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Allrad 2011 is not an issue anymore with our step-by-step tutorial
    Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) model

NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) tyre size

Popular maintenance tutorials for NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E)

More manuals for NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E)

Complete guides for changing the Control arm on different NISSAN QASHQAI models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) Control Arm replacement - online guide
Tips & tricks for your NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E)
View more
  • How to change Control arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Allrad - replacement tricks
    Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
    4K views
    Published on: 07/04/2022
  • Changing Wishbone NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC - Replacement Tips
    Which Coolant is Best? Comparison Test | AUTODOC
    9K views
    Published on: 13/10/2022
  • Maintenance Hacks - NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Control arms replacement guide
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
    4K views
    Published on: 01/04/2021
  • Replace Trailing arm on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) - free video tips
    5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
    7K views
    Published on: 05/02/2024

Most commonly replaced car parts on NISSAN QASHQAI

Professional manuals for the most common NISSAN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME