Important!
This replacement procedure can be used for:
AUDI A3 Convertible (8P7) 1.2 TFSI, AUDI A3 Convertible (8P7) 2.0 TDI, AUDI A3 Convertible (8P7) 1.6 TDI, AUDI A3 Convertible (8P7) 1.6, AUDI A3 Convertible (8P7) 2.0 TDI, AUDI A3 Convertible (8P7) 1.9 TDI, AUDI A3 Convertible (8P7) 2.0 TFSI, AUDI A3 Convertible (8P7) 1.8 TFSI, AUDI A3 Convertible (8P7) 1.4 TFSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for A3 Convertible (8P7) and other AUDI models
Tools
Replacement: rear suspension lower control arm – AUDI A3 Convertible (8P7). Tools you need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 18
Combination spanner #18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower control arm – AUDI A3 Convertible (8P7). AUTODOC experts recommend:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower control arm – AUDI A3 Convertible (8P7). Take the following steps:
  1. Step 1
    How to change Control Arm on Audi A3 Convertible 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI A3 Convertible (8P7) 2.0 TDI 2009 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi A3 Convertible 1.9 TDI 2010 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower control arm – AUDI A3 Convertible (8P7). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on AUDI A3 Convertible (8P7) 1.6 TDI 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI A3 1.2 TFSI 2012 Control Arm - online easy-to-follow instructions
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Control Arm on AUDI A3 Convertible (8P7) 2013: download PDF manuals and video instructions
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Audi A3 Convertible 2.0 TFSI 2008 - download illustrated guide
    Remove the exhaust system fastener.
  8. Step 9
    Need to know how to renew Control Arm on AUDI A3 2009? This free workshop manual will help you to do it yourself
    Make a mark on the crossmember and on the camber adjustment bolt.
  9. Step 10
    Changing of Control Arm on Audi A3 Convertible 2010 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the arm fastening to the beam. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  10. Step 11
    AUDI A3 2.0 TDI Control Arm replacement: online guides and video tutorials
    Support the arm. Use a hydraulic transmission jack.
  11. Step 12
    Replacing Control Arm on Audi A3 Convertible 2012 2.0 TDI by yourself
    Remove the fastening bolt.
  12. Step 13
    A3 Convertible (8P7) 1.2 TFSI 2013 Control Arm DIY replacement workshop manual
    Lower the hydraulic transmission jack by 10-15 cm.
    AUTODOC recommends:
    Replacement: rear suspension lower control arm – AUDI A3 Convertible (8P7). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
  13. Step 14
    How to change Control Arm on AUDI A3 Convertible (8P7) 2008 - tips and tricks
    Take out the spring.
  14. Step 15
    Step-by-step recommendations for DIY replacement Audi A3 Convertible 2009 1.2 TFSI Control Arm
    Remove the fastening bolt.
  15. Step 16
    DIY replacement of Control Arm on AUDI A3 Convertible (8P7) 1.8 TFSI 2010 is not an issue anymore with our step-by-step tutorial
    Remove the arm.
  16. Step 17
    How to change Control Arm on Audi A3 Convertible 2008 - free PDF and video manuals
    Install a new suspension arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI A3 Convertible (8P7) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI A3 Convertible (8P7) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI A3 Convertible (8P7) Control Arm replacement - online guide
Tips & tricks for your AUDI A3 Convertible (8P7)
View more
  • How to change Control arm on AUDI A3 Convertible (8P7) 1.8 TFSI - replacement tricks
    How to fix your car with AUTODOC CLUB
  • Changing Wishbone Audi A3 Convertible 2.0 TDI - Replacement Tips
    What to do if your car's air conditioning isn't working properly | AUTODOC tips
  • Maintenance Hacks - AUDI A3 Convertible (8P7) 1.9 TDI Control arms replacement guide
    Car checks you need to carry out on your car after the winter | AUTODOC tips
  • Replace Trailing arm on Audi A3 Convertible - free video tips
    How to easily repair a punctured tyre | AUTODOC tips

Professional manuals for the most common AUDI models