Disclaimer
How to change front lower arm on AUDI A3 Hatchback (8P1) – replacement guide
downloads:
5
Views:
71
Important!
This replacement procedure can be used for:
AUDI A3 Hatchback (8P1) 1.6 E-Power, AUDI A3 Hatchback (8P1) 2.0 FSI, AUDI A3 Hatchback (8P1) 1.6, AUDI A3 Hatchback (8P1) 2.0 TDI 16V, AUDI A3 Hatchback (8P1) 1.9 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 3.2 V6 quattro, AUDI A3 Hatchback (8P1) 1.6 FSI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) 2.0 TFSI, AUDI A3 Hatchback (8P1) 2.0 TFSI quattro, AUDI A3 Hatchback (8P1) 2.0 TDI 16V quattro, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) S3 quattro, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) 1.8 TFSI, AUDI A3 Hatchback (8P1) 1.4 TFSI, AUDI A3 Hatchback (8P1) S3 quattro, AUDI A3 Hatchback (8P1) 1.8 TFSI quattro, AUDI A3 Hatchback (8P1) 1.6 TDI, AUDI A3 Hatchback (8P1) 1.6 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 1.2 TSI, AUDI A3 Hatchback (8P1) 1.8 T … View more
The steps may slightly vary depending on the car design.
AUDI A3 Hatchback (8P1) 1.6 E-Power, AUDI A3 Hatchback (8P1) 2.0 FSI, AUDI A3 Hatchback (8P1) 1.6, AUDI A3 Hatchback (8P1) 2.0 TDI 16V, AUDI A3 Hatchback (8P1) 1.9 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 3.2 V6 quattro, AUDI A3 Hatchback (8P1) 1.6 FSI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) 2.0 TFSI, AUDI A3 Hatchback (8P1) 2.0 TFSI quattro, AUDI A3 Hatchback (8P1) 2.0 TDI 16V quattro, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) S3 quattro, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) 1.8 TFSI, AUDI A3 Hatchback (8P1) 1.4 TFSI, AUDI A3 Hatchback (8P1) S3 quattro, AUDI A3 Hatchback (8P1) 1.8 TFSI quattro, AUDI A3 Hatchback (8P1) 1.6 TDI, AUDI A3 Hatchback (8P1) 1.6 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 1.2 TSI, AUDI A3 Hatchback (8P1) 1.8 T … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for A3 Hatchback (8P1) and other AUDI models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Combination spanner #18
Drive socket # 16
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – AUDI A3 (8P1). AUTODOC experts recommend:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – AUDI A3 (8P1). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: front lower arm – AUDI A3 (8P1). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5Remove the wheel.Step 6
Clean all joints of the arm. Use a wire brush. Use WD-40 spray.AUTODOC recommends:Replacement: front lower arm – AUDI A3 (8P1). After applying the spray, wait a few minutes.Wear protective goggles. - Step 7
Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #16. Use a tap wrench. - Step 8
Unscrew the front arm fastener. Use a drive socket #18. Use a tap wrench. - Step 9
Unscrew the rear fastener connecting the control arm to the car body. Use a drive socket #18. Use a tap wrench. - Step 10
Unscrew the rear fastener connecting the control arm to the subframe. Use a drive socket #16. Use a tap wrench. - Step 11
Remove the fastening bolts. Use a drive socket #18. Use a drive socket #16. - Step 12
Remove the arm. - Step 13
Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray. - Step 14
Install a new arm.Replacement: front lower arm – AUDI A3 (8P1). AUTODOC recommends:During the installation process, use only new bolts and nuts. - Step 15
Install the front fastener of the arm. - Step 16
Screw the fasteners of the ball joint. Use a drive socket #16. Use a ratchet wrench. - Step 17
Install the rear fastener of the arm. - Step 18
Screw the rear fastener connecting the control arm to the car body. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 19
Install the rear fastener of the arm. - Step 20
Screw the rear fastener connecting the control arm to the subframe. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A3 Hatchback (8P1) model
Popular maintenance tutorials for Audi A3 8P
Complete guides for changing the Control arm on different AUDI A3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A3 Hatchback (8P1)
View more
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
Top 5 possible reasons your car is shaking or vibrating
2 ways to clean the EGR valve – which one is better?
Motorcycle fuel tank restoration
Most commonly replaced car parts on AUDI A3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























