Important!
This replacement procedure can be used for:
PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 i, PEUGEOT 206+ Hatchback (2L_, 2M_) 1.1, PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 i (2LKFWA, 2MKFWA), PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 HDi eco 70, PEUGEOT 206+ Hatchback (2L_, 2M_) 1.1 LPG View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: shock absorbers – PEUGEOT 206+ (T3E). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #19
Combination spanner #21
Drive socket # 19
Drive socket # 21
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – PEUGEOT 206+ (T3E). Professionals recommend:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • All work should be done with the engine stopped.
Replacement: shock absorbers – PEUGEOT 206+ (T3E). Recommended sequence of steps:
  1. Step 1
    How to change Shock Absorber on Peugeot 206+ 2009 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 HDi eco 70 2010 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Peugeot 206+ 1.1 2011 Shock Absorber replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. PEUGEOT 206+ (T3E)
  4. Step 5
    Changing Shock Absorber on PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 i 2012 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT 206 1.6 16V 2013 Shock Absorber - online easy-to-follow instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Shock Absorber on PEUGEOT 206+ Hatchback (2L_, 2M_) 2009: download PDF manuals and video instructions
    Unscrew the upper fastener of the shock absorber. Use a combination spanner #19. Use a drive socket #19. Use a ratchet wrench.
  7. Step 8
    Remove the fastening bolt.
    Step 9
    How hard is it to do yourself: Shock Absorber replacement on Peugeot 206+ 1.4 HDi eco 70 2010 - download illustrated guide
    Unscrew the lower fastener of the shock absorber. Use a drive socket #21. Use a tap wrench.
    Replacement: shock absorbers – PEUGEOT 206+ (T3E). AUTODOC recommends:
    To avoid injuries, hold the shock absorber when undoing the fastening bolts.
  8. Step 10
    Need to know how to renew Shock Absorber on PEUGEOT 206 2011? This free workshop manual will help you to do it yourself
    Support the rear suspension beam. Use a hydraulic transmission jack.
  9. Step 11
    Remove the fastening bolt.
    Step 12
    Changing of Shock Absorber on Peugeot 206+ 2012 won't be an issue if you follow this illustrated step-by-step guide
    Remove the shock absorber.
    Replacement: shock absorbers – PEUGEOT 206+ (T3E). Tip from AUTODOC experts:
    Before installing a new shock absorber you should pump it manually 3-5 times.
  10. Step 13
    PEUGEOT 206 1.4 i (2LKFWA, 2MKFWA) Shock Absorber replacement: online guides and video tutorials
    Place the shock absorber in the wheel arch and secure it.
    AUTODOC recommends:
    Important! Hold the shock absorber while screwing in the fastening bolts. PEUGEOT 206+ (T3E)
  11. Step 14
    Replacing Shock Absorber on Peugeot 206+ 2009 1.4 HDi eco 70 by yourself
    Install the fastening bolts.
  12. Step 15
    206+ Hatchback (2L_, 2M_) 1.6 16V 2010 Shock Absorber DIY replacement workshop manual
    Screw in the lower fastener of the shock absorber. Use a combination spanner #21. Use a drive socket #21. Use a ratchet wrench.
  13. Step 16
    How to change Shock Absorber on PEUGEOT 206+ Hatchback (2L_, 2M_) 2011 - tips and tricks
    Screw the upper fastener of the shock absorber. Use a combination spanner #19. Use a drive socket #19. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 206+ Hatchback (2L, 2M) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 206+ Hatchback (2L_, 2M_) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 206+ Hatchback (2L_, 2M_) Shock Absorber replacement - online guide
Tips & tricks for your PEUGEOT 206+ Hatchback (2L_, 2M_)
View more
  • How to change Shocks on PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 i (2LKFWA, 2MKFWA) - replacement tricks
    How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Changing Shock absorbers Peugeot 206+ 1.4 HDi eco 70 - Replacement Tips
    How to unlock your car without a key | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 206+ Hatchback (2L_, 2M_) 1.1 Struts replacement guide
    How to easily repair a punctured tyre | AUTODOC tips
  • Replace Struts and shocks on Peugeot 206+ - free video tips
    DIY starter repair | AUTODOC tips