Disclaimer
How to change rear engine mounts on PEUGEOT 1007 Hatchback – replacement guide
downloads:
3
Views:
56
Important!
This replacement procedure can be used for:
PEUGEOT 1007 (KM_) 1.6 HDi, PEUGEOT 1007 (KM_) 1.4 16V, PEUGEOT 1007 (KM_) 1.4 HDi, PEUGEOT 1007 (KM_) 1.6 16V, PEUGEOT 1007 (KM_) 1.4 … View more
The steps may slightly vary depending on the car design.
PEUGEOT 1007 (KM_) 1.6 HDi, PEUGEOT 1007 (KM_) 1.4 16V, PEUGEOT 1007 (KM_) 1.4 HDi, PEUGEOT 1007 (KM_) 1.6 16V, PEUGEOT 1007 (KM_) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for 1007 (KM_) and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 16
Ratchet wrench
Crow bar
Hydraulic transmission jack
Fender cover
Replacement: engine mounts – PEUGEOT 1007 (KM_). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: engine mounts – PEUGEOT 1007 (KM_). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 5
Support the gearbox. Use a hydraulic transmission jack.Replacement: engine mounts – PEUGEOT 1007 (KM_). Tip:Take care to prevent the gearbox from being unsupported (hanging). - Step 6
Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench. - Step 7
Remove the fastening bolt. - Step 8
Unscrew the fastener connecting the engine mount to the gearbox housing. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the fastening bolt. - Step 10
Remove the engine mount.Replacement: engine mounts – PEUGEOT 1007 (KM_). Professionals recommend:Carefully check the other engine mounts and replace them if necessary. - Step 11
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray. - Step 12
Install the engine mount to its mounting seat. - Step 13
Install the fastening bolts. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 1007 Hatchback model
Popular maintenance tutorials for PEUGEOT 1007 (KM_)
Complete guides for changing the Engine mounts on different PEUGEOT 1007 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 1007 (KM_)
View more
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
#DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
How to restore a steering wheel | AUTODOC tips
2 ways to clean the EGR valve – which one is better?
Most commonly replaced car parts on PEUGEOT 1007
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























