How to change rear brake pads on Peugeot 207 hatchback – replacement guide
PEUGEOT 207 (WA_, WC_) 1.6, PEUGEOT 207 (WA_, WC_) 1.6 16V, PEUGEOT 207 (WA_, WC_) 1.6 16V, PEUGEOT 207 (WA_, WC_) 1.6 16V Turbo, PEUGEOT 207 (WA_, WC_) 1.6 HDi, PEUGEOT 207 (WA_, WC_) 1.6 HDi, PEUGEOT 207 (WA_, WC_) 1.6 Flex, PEUGEOT 207 (WA_, WC_) 1.6 16V RC, PEUGEOT 207 (WA_, WC_) 1.6 16V Turbo, PEUGEOT 207 (WA_, WC_) 1.6 HDi, PEUGEOT 207 (WA_, WC_) 1.6 HDi, PEUGEOT 207 (WA_, WC_) 1.6 16V VTi, PEUGEOT 207 (WA_, WC_) 1.9 D, PEUGEOT 207 (WA_, WC_) 2.0 HDi … View more
The steps may slightly vary depending on the car design.
How to change rear brake pads on PEUGEOT 207 [TUTORIAL AUTODOC]


- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- Warning! Shut down the engine before starting any work – Peugeot 207 hatchback.
- Step 1

Open the bonnet. Unscrew the brake fluid reservoir cap.
- Step 2
Secure the wheels with chocks.
Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 4

Raise the rear of the car and secure on supports.
- Step 5

Unscrew the wheel bolts.
Replacement: brake pads – Peugeot 207 hatchback. Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 6

Remove the wheel.
- Step 7

Clean the fastener of the parking brake cable. Use a wire brush. Use WD-40 spray.
- Step 8

Release the parking brake cable. Use water pump pliers. Use pliers. Use a crowbar.
- Step 9

Clean the brake caliper fasteners. Use a wire brush. Use all-purpose cleaning spray.
- Step 10

Unscrew the brake caliper fastening. Use a combination spanner #19. Use a drive socket #13. Use a ratchet wrench.
- Step 11

Spread the brake pads. Use a crowbar.
- Step 12

Remove the brake caliper.
Replacement: brake pads – Peugeot 207 hatchback. Professionals recommend:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
- Step 13

Remove the brake pads. Use a crowbar.
AUTODOC recommends:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
- Step 14

Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
AUTODOC recommends:After applying the spray, wait a few minutes.
- Step 15

Treat the brake caliper piston. Use a nylon cleaning brush. Use a brake cleaner.
Replacement: brake pads – Peugeot 207 hatchback. Tip from AUTODOC:After applying the spray, wait a few minutes.
- Step 16

Press in the brake caliper piston. Use brake caliper wind back tool.
Find out which tyre and wheel sizes are compatible with the PEUGEOT 207 Hatchback model
Popular maintenance tutorials for Peugeot 207 Hatchback
Complete guides for changing the Brake pad set on different PEUGEOT 207 models
Track expenses, manage logs, schedule replacements, and more.
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
Motorcycle fuel tank restoration
How to fix your car with AUTODOC CLUB
Complete Steering Rack Rebuild
Most commonly replaced car parts on PEUGEOT 207




































