Disclaimer
How to change rear brake pads on PEUGEOT 205 I Hatchback – replacement guide
downloads:
9
Views:
201
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
PEUGEOT 205 I (741A/C) 1.9 GTI … View more
The steps may slightly vary depending on the car design.
PEUGEOT 205 I (741A/C) 1.9 GTI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Pads for 205 I (741A/C) and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Anti-squeal paste
Wheel impact socket #19
Brake caliper wind back tool
Torque wrench
Rubber mallet
Round-nose pliers
Crow bar
Wheel chock
Replacement: brake pads – PEUGEOT 205 I (741A/C). AUTODOC experts recommend:
- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- Replacement: brake pads – PEUGEOT 205 I (741A/C). Use the following procedure:
Carry out replacement in the following order:
- Step 1Open the bonnet. Unscrew the brake fluid reservoir cap.Step 2
Secure the wheels with chocks. - Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 4Raise the rear of the car and secure on supports.Step 5
Unscrew the wheel bolts.Replacement: brake pads – PEUGEOT 205 I (741A/C). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 6
Remove the wheel. - Step 7
Remove the retaining springs of the brake pads. Use a crowbar. - Step 8
Remove the brake pad retaining pin. Use round-nose pliers. - Step 9
Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Remove the retainer of the brake pads. Use a crowbar. Use a rubber mallet. - Step 11
Remove the brake pads. Use a crowbar.Replacement: brake pads – PEUGEOT 205 I (741A/C). Tip from AUTODOC experts:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced. - Step 12
Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.Replacement: brake pads – PEUGEOT 205 I (741A/C). AUTODOC recommends:Make sure the disc surface is clean before installing the pads. - Step 13
Install new brake pads.Replacement: brake pads – PEUGEOT 205 I (741A/C). Tip:Make sure the pads are installed with linings facing the disc.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 205 I Hatchback model
Popular maintenance tutorials for Peugeot 205 I
Complete guides for changing the Brake pad set on different PEUGEOT 205 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 205 I (741A/C)
View more
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
How I started restoring a driveshaft | Drivetrain restoration – Part 1
What to do if the ABS light comes on: DIY Diagnostics Tips
5 Essential Tips for beginner drivers: Avoid Common Mistakes
Most commonly replaced car parts on PEUGEOT 205
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
































