How to carry out replacement: Brake Pads 1.7 Diesel Peugeot 205 2
Disclaimer
Change Peugeot 205 2 1.9 GTI Brake Pads yourself – manuals and video tutorials

How to change rear brake pads on PEUGEOT 205 II Hatchback – replacement guide

downloads: 0
Views: 21
Download your free tutorial and fix PEUGEOT 205 II (20A/C) 1.7 Diesel problems yourself Download for free 1.46 MB Brake Pads for Peugeot 205 2 Shop now
Leave a comment Open in a new tab
When to replace the Brake Pads on your PEUGEOT 205
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
PEUGEOT 205 II (20A/C) 1.9 GTI, PEUGEOT 205 II (20A/C) 1.9 GTI, PEUGEOT 205 II (20A/C) 1.9 GTI, PEUGEOT 205 II (20A/C) 1.9 GTI Cat, PEUGEOT 205 II (20A/C) 1.4, PEUGEOT 205 II (20A/C) 1.1 XA … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pads for 205 II (20A/C) and other PEUGEOT models
Alternative products
How to change Brake pad set on Peugeot 205 2 1.7 Diesel – step-by-step instructions for straightforward car repair Brake pad set
Tools
Replacement: brake pads – PEUGEOT 205 II (20A/C). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Anti-squeal paste
Wheel impact socket #19
Brake caliper wind back tool
Torque wrench
Rubber mallet
Round-nose pliers
Crow bar
Wheel chock
Buy tools
Replacement: brake pads – PEUGEOT 205 II (20A/C). AUTODOC experts recommend:
  • Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
  • The replacement procedure is identical for all brake pads on the same axle.
  • Replacement: brake pads – PEUGEOT 205 II (20A/C). Use the following procedure:
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Brake Pads on Peugeot 205 2 1987 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace PEUGEOT 205 II (20A/C) 1.7 Diesel 1988 Brake Pads - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 4
    Raise the rear of the car and secure on supports.
    Step 5
    Peugeot 205 2 1.9 GTI 1989 Brake Pads replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: brake pads – PEUGEOT 205 II (20A/C). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 6
    Changing Brake Pads on PEUGEOT 205 II (20A/C) 1.0 1990 by yourself
    Remove the wheel.
  5. Step 7
    How to remove PEUGEOT 205 1.1 1991 Brake Pads - online easy-to-follow instructions
    Remove the retaining springs of the brake pads. Use a crowbar.
  6. Step 8
    How to replace Brake Pads on PEUGEOT 205 II (20A/C) 1992: download PDF manuals and video instructions
    Remove the brake pad retaining pin. Use round-nose pliers.
  7. Step 9
    How hard is it to do yourself: Brake Pads replacement on Peugeot 205 2 1.3 Rallye 1993 - download illustrated guide
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 10
    Need to know how to renew Brake Pads on PEUGEOT 205 1994? This free workshop manual will help you to do it yourself
    Remove the retainer of the brake pads. Use a crowbar. Use a rubber mallet.
  9. Step 11
    Changing of Brake Pads on Peugeot 205 2 1995 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake pads. Use a crowbar.
    Replacement: brake pads – PEUGEOT 205 II (20A/C). Tip from AUTODOC experts:
    Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
  10. Step 12
    PEUGEOT 205 1.9 GTI Brake Pads replacement: online guides and video tutorials
    Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
    Replacement: brake pads – PEUGEOT 205 II (20A/C). AUTODOC recommends:
    Make sure the disc surface is clean before installing the pads.
  11. Step 13
    Replacing Brake Pads on Peugeot 205 2 1997 1.7 Diesel by yourself
    Install new brake pads.
    Replacement: brake pads – PEUGEOT 205 II (20A/C). Tip:
    Make sure the pads are installed with linings facing the disc.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 205 II Hatchback model

Peugeot 205 2 tyre size

Popular maintenance tutorials for Peugeot 205 2

More manuals for Peugeot 205 2

Complete guides for changing the Brake pad set on different PEUGEOT 205 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 205 II (20A/C) Brake Pads replacement - online guide
Tips & tricks for your PEUGEOT 205 II (20A/C)
View more
  • How to change Brake pad set on PEUGEOT 205 II (20A/C) 1.4 - replacement tricks
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
    2K views
    Published on: 15/02/2021
  • Changing Disc pads Peugeot 205 2 1.7 Diesel - Replacement Tips
    Kolbenschmidt plastic gauge overview
    3K views
    Published on: 23/04/2025
  • Maintenance Hacks - PEUGEOT 205 II (20A/C) 1.9 GTI Brake pad kit replacement guide
    Cold starts | 5 mistakes that wreck your car
    12K views
    Published on: 23/10/2025
  • Replace Disc brake pads on Peugeot 205 2 - free video tips
    K2 ROTON wheel cleaner overview
    4K views
    Published on: 27/03/2025

Most commonly replaced car parts on PEUGEOT 205

Professional manuals for the most common PEUGEOT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 205 II (20A/C) Brake Pads replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME