When to replace the Brake Pad Wear Sensor on your FORD TRANSIT
Recommended replacement interval for the part category Brake pad wear sensor : 30000 km
Important!
This replacement procedure can be used for:
FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi 4x4, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 3.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pad Wear Sensor for Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) and other FORD models
Alternative products
How to change Brake pad wear sensor on Ford Transit Mk6 Minibus 2.2 TDCi – step-by-step instructions for straightforward car repair Brake pad wear sensor
Tools
Replacement: brake pad wear sensor – FORD TRANSIT Bus. Tools you'll need:
Wire brush
Nylon brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Anti-squeal paste
Electronic spray
Ceramic grease
Torque wrench
18 mm combination spanner
21 mm combination spanner
13 mm socket
21 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Brake caliper wind back tool
Mounting lever
Long nose pliers
Car lift or jack with jack stands, and wheel chocks
Replacement: brake pad wear sensor – FORD TRANSIT Bus. AUTODOC experts recommend:
  • The replacement procedure is identical for both brake pad wear sensors on the same axle.
  • Please note: all work on the car – FORD TRANSIT Bus – should be done with the engine switched off.
Carry out the replacement steps as follows:
  1. Step 1
    Open the bonnet.
    Step 2
    How to change Brake Pad Wear Sensor on Ford Transit Mk6 Minibus 2006 - free PDF and video manuals
    Loosen the brake fluid reservoir cap.
  2. Step 3
    How to replace FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi 2007 Brake Pad Wear Sensor - step-by-step manuals and video guides
    Secure the wheels with chocks.
  3. Step 4
    Ford Transit Mk6 Minibus 2.4 TDCi 2008 Brake Pad Wear Sensor replacement: free workshop manuals
    Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar.
  4. Step 5
    Raise the vehicle.
    Replacement: brake pad wear sensor – FORD TRANSIT Bus. Tip:
    If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
    Step 6
    Changing Brake Pad Wear Sensor on FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi 2009 by yourself
    Unscrew the wheel nuts.
    Caution!
    To avoid injury, hold up the wheel when unscrewing the nuts.
  5. Step 7
    How to remove FORD TRANSIT 2.4 TDCi 2010 Brake Pad Wear Sensor - online easy-to-follow instructions
    Remove the wheel.
  6. Step 8
    How to replace Brake Pad Wear Sensor on FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2011: download PDF manuals and video instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 9
    How hard is it to do yourself: Brake Pad Wear Sensor replacement on Ford Transit Mk6 Minibus 2.2 TDCi 2012 - download illustrated guide
    Spread the brake pads apart. Use a mounting lever.
  8. Step 10
    Need to know how to renew Brake Pad Wear Sensor on FORD TRANSIT 2013? This free workshop manual will help you to do it yourself
    Unscrew the brake caliper fasteners. Use a 21 mm combination spanner.
  9. Step 11
    Changing of Brake Pad Wear Sensor on Ford Transit Mk6 Minibus 2014 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolts.
  10. Step 12
    FORD TRANSIT 3.2 TDCi Brake Pad Wear Sensor replacement: online guides and video tutorials
    Remove the brake caliper.
    Replacement: brake pad wear sensor – FORD TRANSIT Bus. AUTODOC experts recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting it from the brake hose to avoid opening the brake line.Make sure that the brake caliper is not hanging from the brake hose.Do not press the brake pedal after the caliper has been removed. This may cause the piston to fall out of the caliper bore resulting in the brake fluid leakage and air entering the system.
  11. Step 13
    Replacing Brake Pad Wear Sensor on Ford Transit Mk6 Minibus 2007 2.2 TDCi by yourself
    Disconnect the brake pad wear sensor. Use long nose pliers.
  12. Step 14
    Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi 2008 Brake Pad Wear Sensor DIY replacement workshop manual
    Detach the brake pad wear sensor cable. Use long nose pliers.
  13. Step 15
    How to change Brake Pad Wear Sensor on FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2009 - tips and tricks
    Detach the brake pad wear sensor connector.
  14. Step 16
    Step-by-step recommendations for DIY replacement Ford Transit Mk6 Minibus 2010 2.4 TDCi Brake Pad Wear Sensor
    Clean the brake caliper piston. Use a nylon brush. Use a brake cleaner.
  15. Step 17
    DIY replacement of Brake Pad Wear Sensor on FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 3.2 TDCi 2011 is not an issue anymore with our step-by-step tutorial
    Retract the brake caliper piston. Use a brake caliper wind back tool.
  16. Step 18
    How to change Brake Pad Wear Sensor on Ford Transit Mk6 Minibus 2006 - free PDF and video manuals
    Treat the brake pad wear sensor connector. Use an electronic spray.
  17. Step 19
    How to replace FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi 2007 Brake Pad Wear Sensor - step-by-step manuals and video guides
    Attach the connector of the brake pad wear sensor.
  18. Step 20
    Ford Transit Mk6 Minibus 2.4 TDCi 2008 Brake Pad Wear Sensor replacement: free workshop manuals
    Secure the brake pad wear sensor cable.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Minibus (V347, V348) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) Brake Pad Wear Sensor replacement - online guide
Tips & tricks for your FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC)
View more
  • How to change Brake pad wear indicator on FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 3.2 TDCi - replacement tricks
    Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
  • Changing Brake pad sensor Ford Transit Mk6 Minibus 2.2 TDCi - Replacement Tips
    Transform Your Car's Look: 6 Simple Accessories You Need to Try!
  • Maintenance Hacks - FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi Brake wear indicator replacement guide
    Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
  • Replace Brake wear sensor on Ford Transit Mk6 Minibus - free video tips
    How to repair a bumper yourself | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) Brake Pad Wear Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME