Recommended replacement interval for the part category Brake pad wear sensor : 30000 km

Important!

This replacement procedure can be used for:
FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi 4x4, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.3 16V RWD, FORD Transit Mk6 Box (V347, V348, FA) 3.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi 4x4, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi … View more

The steps may slightly vary depending on the car design.

How to change the rear brake pads on the FORD TRANSIT MK7 [AUTODOC TUTORIAL]

All the parts you need to replace – Brake Pad Wear Sensor for Transit Mk6 Box (V347, V348, FA) and other FORD models

Alternative products

Brake pad wear sensor

Replacement: brake pad wear sensor – Ford Transit Mk7 van. Tools you'll need:

                      Wire brush
                    
                      Nylon brush
                    
                      WD-40 spray
                    
                      All-purpose cleaning spray
                    
                      Brake cleaner
                    
                      Anti-squeal paste
                    
                      Electronic spray
                    
                      Ceramic grease
                    
                      Torque wrench
                    
                      18 mm combination spanner
                    
                      21 mm combination spanner
                    
                      13 mm socket
                    
                      21 mm wheel impact socket
                    
                      Ratchet wrench or power tool for removal/installation of threaded fasteners
                    
                      Tommy bar
                    
                      Brake caliper wind back tool
                    
                      Mounting lever
                    
                      Long nose pliers
                    
                      Car lift or jack with jack stands, and wheel chocks

Buy tools

Replacement: brake pad wear sensor – Ford Transit Mk7 van. AUTODOC experts recommend:

The replacement procedure is identical for both brake pad wear sensors on the same axle.
Please note: all work on the car – Ford Transit Mk7 van – should be done with the engine switched off.

Carry out the replacement steps as follows:

Step 1

Open the bonnet.
Step 2

Loosen the brake fluid reservoir cap.
Step 3

Secure the wheels with chocks.
Step 4

Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar.
Step 5

Raise the vehicle.

Replacement: brake pad wear sensor – Ford Transit Mk7 van. Tip:
If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
Step 6

Unscrew the wheel nuts.

Caution!
To avoid injury, hold up the wheel when unscrewing the nuts.
Step 7

Remove the wheel.
Step 8

Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
Step 9

Spread the brake pads apart. Use a mounting lever.
Step 10

Unscrew the brake caliper fasteners. Use a 21 mm combination spanner.
Step 11

Remove the fastening bolts.
Step 12

Remove the brake caliper.

Replacement: brake pad wear sensor – Ford Transit Mk7 van. AUTODOC experts recommend:
Tie the caliper to the suspension or to the body with a wire without disconnecting it from the brake hose to avoid opening the brake line.Make sure that the brake caliper is not hanging from the brake hose.Do not press the brake pedal after the caliper has been removed. This may cause the piston to fall out of the caliper bore resulting in the brake fluid leakage and air entering the system.
Step 13

Disconnect the brake pad wear sensor. Use long nose pliers.
Step 14

Detach the brake pad wear sensor cable. Use long nose pliers.
Step 15

Detach the brake pad wear sensor connector.
Step 16

Clean the brake caliper piston. Use a nylon brush. Use a brake cleaner.
Step 17

Retract the brake caliper piston. Use a brake caliper wind back tool.
Step 18

Treat the brake pad wear sensor connector. Use an electronic spray.
Step 19

Attach the connector of the brake pad wear sensor.
Step 20

Secure the brake pad wear sensor cable.
Step 21

Attach the new wear sensor to the inner pad.
Step 22

Install the brake caliper.
Step 23

Install the fastening bolts.
Step 24

Tighten the brake caliper fasteners. Use an 18 mm combination spanner. Use a 13 mm socket. Use a torque wrench. Tightening torque: 31 N·m.
Step 25

Clean the wheel rim mounting seat. Use a wire brush. Use an all-purpose cleaning spray.
Step 26

Treat the wheel hub surface that contacts the wheel rim. Use ceramic grease.
Step 27

Install the wheel.

Replacement: brake pad wear sensor – Ford Transit Mk7 van. Professionals recommend:
To avoid injury, hold up the wheel when screwing on the fastening nuts.
Step 28

Screw on the wheel nuts. Use a 21 mm wheel impact socket. Use a ratchet wrench.
Step 29

Lower the car and tighten the wheel nuts in a criss-cross pattern. Use a 21 mm wheel impact socket. Use a torque wrench. Tightening torque: 200 N·m.
Step 30

Remove the jack, jack stands, and wheel chocks.
Step 31

Without starting the engine, press the brake pedal several times until you feel significant resistance.
Step 32

Check the brake fluid level in the reservoir and top up if necessary.
Step 33

Tighten the brake fluid reservoir cap.
Step 34

Close the bonnet.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Van (V347, V348) model

Ford Transit Mk6 Van tyre size

How to change a front ABS sensor on the Ford Transit Mk7 van – replacement guide

Free download PDF
1.84 MB
How to change a front brake hose on the Ford Transit Mk7 van – replacement guide

Free download PDF
2.5 MB
How to change a rear brake caliper bracket on the Ford Transit Mk7 van – replacement guide

Free download PDF
2.27 MB
How to change front brake pad wear sensor on Ford Transit Mk7 van – replacement guide

Free download PDF
1.91 MB
How to change front brake discs on Ford Transit Mk7 van – replacement guide

Free download PDF
3.89 MB
How to change front brake pads on Ford Transit Mk7 van – replacement guide

Free download PDF
1.96 MB

How to change front brake pad wear sensor on Ford Transit Mk7 van – replacement guide

Free download PDF
1.91 MB
How to change front brake pad wear sensor on FORD Transit Mk6 Caja / Chasis (V347, V348) – replacement guide

Free download PDF
1.73 MB
How to change rear brake pad wear sensor on FORD Transit Mk6 Caja / Chasis (V347, V348) – replacement guide

Free download PDF
1.92 MB
How to change front brake pad wear sensor on FORD Transit Mk6 Minibus (V347, V348) – replacement guide

Free download PDF
1.72 MB
How to change rear brake pad wear sensor on FORD Transit Mk6 Minibus (V347, V348) – replacement guide

Free download PDF
1.92 MB
How to change front brake pad wear sensor on FORD Transit Mk6 Tourneo – replacement guide

Free download PDF
1.72 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

5 mistakes when replacing consumables

5K views

Published on: 06/02/2025
DIY rear axle restoration | Drivetrain restoration – Part 2

6K views

Published on: 07/11/2024
What to do if your check engine light is on | AUTODOC tips

19K views

Published on: 19/08/2020
How to choose the right engine oil for your car | AUTODOC

12K views

Published on: 01/07/2020