Important!
This replacement procedure can be used for:
AUDI TT Coupe (8J3) 2.0 TFSI, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.5 RS quattro, AUDI TT Coupe (8J3) 2.0 TFSI, AUDI TT Coupe (8J3) 3.2 V6 quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 1.8 TFSI, AUDI TT Coupe (8J3) 2.0 TDI quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.5 RS quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: anti roll bar links – AUDI TT (8J3). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #14
Combination spanner #16
HEX bit No.H5.
XZN socket bit # 6
Drive socket # 14
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: anti roll bar links – AUDI TT (8J3). AUTODOC recommends:
  • Replace the stabiliser links on AUDI TT (8J3) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI TT (8J3). Use the following procedure:
  1. Step 1
    How to change Anti Roll Bar Links on Audi TT 8J 2006 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI TT Coupe (8J3) 2.0 TFSI 2007 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi TT 8J 3.2 V6 quattro 2008 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – AUDI TT (8J3). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on AUDI TT Coupe (8J3) 1.8 TFSI 2009 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI TT 2.0 TDI quattro 2010 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on AUDI TT Coupe (8J3) 2011: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Audi TT 8J 2.0 TFSI quattro 2012 - download illustrated guide
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on AUDI TT 2013? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – AUDI TT (8J3). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on Audi TT 8J 2014 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    AUDI TT 3.2 V6 quattro Anti Roll Bar Links replacement: online guides and video tutorials
    Ιnstall the transverse stabilizer link.
  11. Step 12
    Replacing Anti Roll Bar Links on Audi TT 8J 2007 2.0 TFSI by yourself
    Tighten the stabiliser link fastener. Use a combination spanner #14. Use HEX No.H5. Use a ratchet wrench.
  12. Step 13
    TT Coupe (8J3) 2.0 TDI quattro 2008 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the fastener connecting the stabilizer bar with the control arm. Use a drive socket #14. Use a torque wrench. Tighten it to 45 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI TT Coupe (8J3) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI TT Coupe (8J3) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY AUDI TT Coupe (8J3) Anti Roll Bar Links replacement - online guide
Tips & tricks for your AUDI TT Coupe (8J3)
View more
  • How to change Drop links on AUDI TT Coupe (8J3) 2.0 TTS quattro - replacement tricks
    DIY jack restoration | AUTODOC tips
  • Changing Stabilizer link Audi TT 8J 2.0 TFSI - Replacement Tips
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Maintenance Hacks - AUDI TT Coupe (8J3) 3.2 V6 quattro Sway bar link replacement guide
    How do EGR valves work? | AUTODOC
  • Replace Drop link on Audi TT 8J - free video tips
    5 car tips for a winter's day | AUTODOC tips

Professional manuals for the most common AUDI models