Disclaimer
How to change rear suspension lower control arm on AUDI TT Coupe (8J3) – replacement guide
downloads:
47
Views:
502
Important!
This replacement procedure can be used for:
AUDI TT Coupe (8J3) 2.0 TFSI, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.5 RS quattro, AUDI TT Coupe (8J3) 2.0 TFSI, AUDI TT Coupe (8J3) 3.2 V6 quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 1.8 TFSI, AUDI TT Coupe (8J3) 2.0 TDI quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.5 RS quattro … View more
The steps may slightly vary depending on the car design.
AUDI TT Coupe (8J3) 2.0 TFSI, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.5 RS quattro, AUDI TT Coupe (8J3) 2.0 TFSI, AUDI TT Coupe (8J3) 3.2 V6 quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 1.8 TFSI, AUDI TT Coupe (8J3) 2.0 TDI quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.5 RS quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for TT Coupe (8J3) and other AUDI models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 18
Combination spanner #18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower control arm – AUDI TT (8J3). AUTODOC experts recommend:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: rear suspension lower control arm – AUDI TT (8J3). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: rear suspension lower control arm – AUDI TT (8J3). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the control arm fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 8
Remove the exhaust system fastener. - Step 9
Make a mark on the crossmember and on the camber adjustment bolt. - Step 10
Unscrew the arm fastening to the beam. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 11
Support the arm. Use a hydraulic transmission jack. - Step 12
Remove the fastening bolt. - Step 13
Lower the hydraulic transmission jack by 10-15 cm.AUTODOC recommends:Replacement: rear suspension lower control arm – AUDI TT (8J3). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms. - Step 14
Take out the spring. - Step 15
Remove the fastening bolt. - Step 16
Remove the arm. - Step 17
Install a new suspension arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI TT Coupe (8J3) model
Popular maintenance tutorials for Audi TT 8J
Complete guides for changing the Control arm on different AUDI TT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI TT Coupe (8J3)
View more
Top 5 reasons why your car squeals | AUTODOC Tips
How to replace a timing chain yourself
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
Most commonly replaced car parts on AUDI TT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
































