
Disclaimer
How to change front anti roll bar links on AUDI TT Roadster (8N9) – replacement guide
downloads:
1
Views:
19
Important!
This replacement procedure can be used for:
AUDI TT Roadster (8N9) 1.8 T, AUDI TT Roadster (8N9) 1.8 T quattro, AUDI TT Roadster (8N9) 1.8 T quattro, AUDI TT Roadster (8N9) 1.8 T, AUDI TT Roadster (8N9) 3.2 VR6 quattro, AUDI TT Roadster (8N9) 1.8 T, AUDI TT Roadster (8N9) 1.8 T quattro, AUDI TT Roadster (8N9) 1.8 T … View more
The steps may slightly vary depending on the car design.
AUDI TT Roadster (8N9) 1.8 T, AUDI TT Roadster (8N9) 1.8 T quattro, AUDI TT Roadster (8N9) 1.8 T quattro, AUDI TT Roadster (8N9) 1.8 T, AUDI TT Roadster (8N9) 3.2 VR6 quattro, AUDI TT Roadster (8N9) 1.8 T, AUDI TT Roadster (8N9) 1.8 T quattro, AUDI TT Roadster (8N9) 1.8 T … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for TT Roadster (8N9) and other AUDI models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Copper grease
Combination spanner #18
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on AUDI TT Roadster (8N9) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI TT Roadster (8N9). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. AUDI TT Roadster (8N9)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
- Step 8Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 9Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
- Step 10Remove the stabilizer rod.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI TT Roadster (8N9) model
Popular maintenance tutorials for Audi TT 8N Roadster
Complete guides for changing the Drop links on different AUDI TT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI TT Roadster (8N9)
View more
- How to inspect and troubleshoot your car heater when it’s not working
- Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
- Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
- 5 most common causes of oil leaks | AUTODOC tips
Most commonly replaced car parts on AUDI TT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME