Important!

This replacement procedure can be used for:
AUDI TT Coupe (FV3, FVP) 2.0 TFSI, AUDI TT Coupe (FV3, FVP) 2.0 TFSI quattro, AUDI TT Coupe (FV3, FVP) 2.0 TDI, AUDI TT Coupe (FV3, FVP) 2.0 TTS quattro, AUDI TT Coupe (FV3, FVP) 1.8 TFSI, AUDI TT Coupe (FV3, FVP) 2.0 TTS quattro, AUDI TT Coupe (FV3, FVP) 2.0 TTS quattro, AUDI TT Coupe (FV3, FVP) 2.5 RS quattro, AUDI TT Coupe (FV3, FVP) 2.0 TDI quattro, AUDI TT Coupe (FV3, FVP) 2.0 TFSI quattro … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for TT Coupe (FV3, FVP) and other AUDI models

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – AUDI TT (FV3). Tip from AUTODOC experts:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Combination spanner #18
                    
                      HEX bit No.H6.
                    
                      Drive socket # 18 
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – AUDI TT (FV3). Professionals recommend:

Replace the stabiliser links on AUDI TT (FV3) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – AUDI TT (FV3). Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. AUDI TT (FV3)
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #18. Use HEX No.H6. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – AUDI TT (FV3). Tip:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Ιnstall the transverse stabilizer link.
Step 12

Tighten the stabiliser link fastener. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
Step 13

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a torque wrench. Tighten it to 65 Nm torque.
Step 14

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #18. Use a torque wrench. Tighten it to 65 Nm torque.
Step 15

Treat all joints of the stabiliser link. Use copper grease.
Step 16

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 17

Clean the brake disk surface. Use a brake cleaner.

Replacement: anti roll bar links – AUDI TT (FV3). AUTODOC recommends:
After applying the spray, wait a few minutes.
Step 18

Install the wheel.

Replacement: anti roll bar links – AUDI TT (FV3). Tip:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 19

Screw in the wheel bolts. Use wheel impact socket #17.
Step 20

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 nm torque.
Step 21

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI TT Coupe (FV3, FVP) model

Audi TT Coupe tyre size

How to change rear wheel bearing on AUDI TT Coupe (FV3, FVP) – replacement guide

Free download PDF
2.22 MB
How to change front wheel bearing on AUDI TT Coupe (FV3, FVP) – replacement guide

Free download PDF
2.49 MB
How to change front strut mount on AUDI TT Coupe (FV3, FVP) – replacement guide

Free download PDF
3.41 MB
How to change front brake pads on AUDI TT Coupe (FV3, FVP) – replacement guide

Free download PDF
1.64 MB
How to change rear brake pads on AUDI TT Coupe (FV3, FVP) – replacement guide

Free download PDF
1.52 MB
How to change rear brake discs on AUDI TT Coupe (FV3, FVP) – replacement guide

Free download PDF
1.64 MB

How to change rear anti roll bar links on AUDI TT Coupe (8J3) – replacement guide

Free download PDF
1.37 MB
How to change front anti roll bar links on AUDI TT Coupe (8J3) – replacement guide

Free download PDF
1.15 MB
How to change front anti roll bar links on AUDI TT Coupe (8N3) – replacement guide

Free download PDF
1.12 MB
How to change front anti roll bar links on AUDI TT Roadster (8N9) – replacement guide

Free download PDF
1.12 MB
How to change rear anti roll bar links on AUDI TT Roadster (8J9) – replacement guide

Free download PDF
1.37 MB
How to change front anti roll bar links on AUDI TT Roadster (8J9) – replacement guide

Free download PDF
1.15 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!

7K views

Published on: 18/07/2024
How to Install a New Windscreen Yourself | AUTODOC Expert Tips

7K views

Published on: 06/06/2024
DIY vehicle AC compressor restoration

582K views

Published on: 28/11/2024
TOP 8 mistakes car owners make | AUTODOC tips

14K views

Published on: 09/12/2021