Important!

This replacement procedure can be used for:
FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi, FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi, FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Intake pipe, air filter

Replacement: intake pipe – FORD FOCUS II Estate (DA_). Tools you'll need:

                      All-purpose cleaning spray
                    
                      Drive socket # 7 
                    
                      Ratchet wrench
                    
                      Fender cover

Buy tools

Replacement: intake pipe – FORD FOCUS II Estate (DA_). AUTODOC recommends:

All work should be done with the engine stopped.

Replacement: intake pipe – FORD FOCUS II Estate (DA_). Take the following steps:

Step 1

Open the bonnet.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Remove the engine cover.

AUTODOC recommends:
Replacement: intake pipe – FORD FOCUS II Estate (DA_). Do not use excessive force when removing the part as this may damage it.
Step 4

Clean the air hose fastener. Use all-purpose cleaning spray.
Step 5

Loosen the binding clamps attaching the air duct to the air filter housing and to the charger. Use a drive socket #7. Use a ratchet wrench.
Step 6

On the right side, detach the PCV valve hose from the engine cover.
Step 7

Remove the air intake hose.
Step 8

Clean the mounting seat of the air intake hose.
Step 9

Install the air intake pipe and secure it.
Step 10

On the right side, attach the PCV valve hose to the engine cover.
Step 11

Tighten the binding clamps that attach the air duct to the air filter housing and to the charger. Use a drive socket #7. Use a ratchet wrench.
Step 12

Install the engine cover and secure it.

AUTODOC recommends:
Replacement: intake pipe – FORD FOCUS II Estate (DA_). To avoid damaging the part during installation, do not use excessive force.Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners.
Step 13

Remove the fender protection cover.

Step 14

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Estate (DA_, FFS, DS) model

Ford Focus 2 da tyre size

How to change pollen filter on FORD Focus II Estate (DA_, FFS, DS) – replacement guide

Free download PDF 1.11 MB
How to change air filter on FORD Focus II Estate (DA_, FFS, DS) – replacement guide

Free download PDF 972.8 KB
How to change fuel filter on FORD Focus II Estate (DA_, FFS, DS) – replacement guide

Free download PDF 1.34 MB
How to change engine oil and filter on FORD Focus Mk2 Estate (DA_, FFS, DS) – replacement guide

Free download PDF 2.4 MB
How to change front brake pads on FORD Focus Mk2 Estate (DA_, FFS, DS) – replacement guide

Free download PDF 2.36 MB
How to change rear brake pads on FORD Focus II Estate (DA_, FFS, DS) – replacement guide

Free download PDF 1.72 MB

How to change intake pipe on FORD Focus II Hatchback (DA_, HCP, DP) – replacement guide

Free download PDF 870.4 KB
How to change intake pipe on FORD Focus C-Max (DM2) – replacement guide

Free download PDF 870.4 KB
How to change intake pipe on Ford Focus MK2 – replacement guide

Free download PDF 1.05 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

What to do if the ABS light comes on: DIY Diagnostics Tips

8K views

Published on: 11/03/2021
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1

130K views

Published on: 14/08/2025
How to choose a used car and not regret it

4K views

Published on: 05/02/2026
DIY restoration of an old impact wrench

39K views

Published on: 07/11/2025