When to replace the Ignition Leads on your FORD MONDEO
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
FORD MONDEO III Estate (BWY) 1.8 SCi, FORD MONDEO III Estate (BWY) 2.0 16V, FORD MONDEO III Estate (BWY) 1.8 16V, FORD MONDEO III Estate (BWY) 1.8 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Leads for MONDEO III Estate (BWY) and other FORD models
Alternative products
How to change Ignition Cable Kit on Ford Mondeo bwy 2.0 16V – step-by-step instructions for straightforward car repair Ignition Cable Kit
Tools
Replacement: ignition leads – FORD MONDEO III Estate (BWY). Tools you might need:
Fender cover
Replacement: ignition leads – FORD MONDEO III Estate (BWY). Tip from AUTODOC:
  • All work should be done with the engine stopped.
Replacement: ignition leads – FORD MONDEO III Estate (BWY). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Leads on Ford Mondeo bwy 2000 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition leads – FORD MONDEO III Estate (BWY). To avoid damaging the part when removing it, do not use excessive force.
  2. Step 4
    How to replace FORD MONDEO III Estate (BWY) 2.0 16V 2001 Ignition Leads - step-by-step manuals and video guides
    Make marks to indicate the order of installation of the spark plug wires.
  3. Step 5
    Ford Mondeo bwy 2.0 TDCi 2002 Ignition Leads replacement: free workshop manuals
    Disconnect the spark plug wires from the ignition coil. Disconnect the spark plug wires from the spark plugs.
    Replacement: ignition leads – FORD MONDEO III Estate (BWY). Tip:
    Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
  4. Step 6
    Changing Ignition Leads on FORD MONDEO III Estate (BWY) 1.8 16V 2003 by yourself
    Connect the spark plug wires to the ignition coil. Connect the new spark plug wires to the spark plugs.
    Replacement: ignition leads – FORD MONDEO III Estate (BWY). Tip from AUTODOC experts:
    Follow the installation sequence.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Estate (BWY) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD MONDEO III Estate (BWY) Ignition Leads replacement - online guide
Tips & tricks for your FORD MONDEO III Estate (BWY)
View more
  • How to change Plug leads on FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi - replacement tricks
    How to remove rust | AUTODOC tips
  • Changing Spark plug leads Ford Mondeo bwy 2.0 16V - Replacement Tips
    What to do if your car’s bonnet won’t open | AUTODOC tips
  • Maintenance Hacks - FORD MONDEO III Estate (BWY) 2.0 TDCi Spark plug wire replacement guide
    Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
  • Replace Ignition cable set on Ford Mondeo bwy - free video tips
    Kolbenschmidt plastic gauge overview
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD MONDEO III Estate (BWY) Ignition Leads replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME