When to replace the Ignition Leads on your FORD FIESTA
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) ST150 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Leads for Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) and other FORD models
Alternative products
How to change Ignition Cable Kit on Ford Fiesta Mk5 1.4 TDCi – step-by-step instructions for straightforward car repair Ignition Cable Kit
Tools
Replacement: ignition leads – FORD FIESTA V (JH_, JD_). Tools you might need:
Fender cover
Replacement: ignition leads – FORD FIESTA V (JH_, JD_). Tip from AUTODOC:
  • All work should be done with the engine stopped.
Replacement: ignition leads – FORD FIESTA V (JH_, JD_). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Leads on Ford Fiesta Mk5 2001 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition leads – FORD FIESTA V (JH_, JD_). To avoid damaging the part when removing it, do not use excessive force.
  2. Step 4
    How to replace FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.4 TDCi 2002 Ignition Leads - step-by-step manuals and video guides
    Make marks to indicate the order of installation of the spark plug wires.
  3. Step 5
    Ford Fiesta Mk5 1.4 16V 2003 Ignition Leads replacement: free workshop manuals
    Disconnect the spark plug wires from the ignition coil. Disconnect the spark plug wires from the spark plugs.
    Replacement: ignition leads – FORD FIESTA V (JH_, JD_). Tip:
    Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
  4. Step 6
    Changing Ignition Leads on FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.25 16V 2004 by yourself
    Connect the spark plug wires to the ignition coil. Connect the new spark plug wires to the spark plugs.
    Replacement: ignition leads – FORD FIESTA V (JH_, JD_). Tip from AUTODOC experts:
    Follow the installation sequence.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) Ignition Leads replacement - online guide
Tips & tricks for your FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3)
View more
  • How to change Plug leads on FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.3 - replacement tricks
    K2 ROTON wheel cleaner overview
  • Changing Spark plug leads Ford Fiesta Mk5 1.4 TDCi - Replacement Tips
    How to get your motorcycle ready for spring
  • Maintenance Hacks - FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.4 16V Spark plug wire replacement guide
    DIY jack restoration | AUTODOC tips
  • Replace Ignition cable set on Ford Fiesta Mk5 - free video tips
    Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) Ignition Leads replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME