Important!
This replacement procedure can be used for:
VW KAEFER 1600 i (Mexico) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for KAEFER and other VW models
Tools
Replacement: ignition coil – VW KAEFER. List of the tools you'll need:
Electronic spray
Torque wrench
Drive socket # 10
Torx bit T30
Ratchet wrench
Fender cover
Replacement: ignition coil – VW KAEFER. Tip from AUTODOC:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – VW KAEFER – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on VW KAEFER 1947 - free PDF and video manuals
    Unscrew the ignition coil bracket. Use Torx T30. Use a ratchet wrench.
  2. Step 4
    How to replace VW KAEFER 1200 1.2 1948 Ignition Coil - step-by-step manuals and video guides
    Remove the ignition coil.
  3. Step 5
    VW KAEFER 1300 1.3 (11) 1949 Ignition Coil replacement: free workshop manuals
    Disconnect the high voltage wire.
    Replacement: ignition coil – VW KAEFER. AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.
  4. Step 6
    Changing Ignition Coil on VW KAEFER 1300 1.3 1950 by yourself
    Detach the connector from the ignition coil.
  5. Step 7
    How to remove VW BEETLE TYPE 1 1500 1.5 1951 Ignition Coil - online easy-to-follow instructions
    Remove the cowl grille seal.
  6. Step 8
    How to replace Ignition Coil on VW KAEFER 1952: download PDF manuals and video instructions
    Raise up and remove the cowl grille.
  7. Step 9
    How hard is it to do yourself: Ignition Coil replacement on VW KAEFER 1.2 1953 - download illustrated guide
    Install a new ignition coil.
  8. Step 10
    Need to know how to renew Ignition Coil on VW BEETLE TYPE 1 1954? This free workshop manual will help you to do it yourself
    Tighten the ignition coil fastening. Use a drive socket #10. Use a torque wrench. Tighten it to 7 nm torque.
  9. Step 11
    Changing of Ignition Coil on VW KAEFER 1955 won't be an issue if you follow this illustrated step-by-step guide
    Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Beetle model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW KAEFER Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW KAEFER Ignition Coil replacement - online guide
Tips & tricks for your VW KAEFER
View more
  • How to change Coil pack on VW KAEFER 1303 LS, S 1.6 (13) - replacement tricks
    How to polish your car | AUTODOC tips
  • Changing Ignition coil pack VW KAEFER 1200 1.2 - Replacement Tips
    5 car interior cleaning mistakes | AUTODOC tips
  • Maintenance Hacks - VW KAEFER 1300 1.3 (11) Ignition coils replacement guide
    Top 5 brake repair mistakes | AUTODOC tips
  • Replace Coil packs on VW KAEFER - free video tips
    Top 5 reasons why your car squeals | AUTODOC Tips