Disclaimer
How to change fuel filter on PEUGEOT 406 Saloon – replacement guide
downloads:
23
Views:
481
Recommended replacement interval for the part category Fuel filter : 30000 km
Important!
This replacement procedure can be used for:
PEUGEOT 406 (8B) 1.9 D, PEUGEOT 406 (8B) 1.9 TD, PEUGEOT 406 (8B) 2.1 TD 12V, PEUGEOT 406 (8B) 1.9 TD … View more
The steps may slightly vary depending on the car design.
PEUGEOT 406 (8B) 1.9 D, PEUGEOT 406 (8B) 1.9 TD, PEUGEOT 406 (8B) 2.1 TD 12V, PEUGEOT 406 (8B) 1.9 TD … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for 406 (8B) and other PEUGEOT models
Alternative products

All-purpose cleaning spray
Torque wrench
HEX bit No.H4
Ratchet wrench
Hand-operated fluid syringe
Fender cover
Replacement: fuel filter – PEUGEOT 406 (8B). Tip from AUTODOC:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- Please note: all work on the car – PEUGEOT 406 (8B) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Clean the fuel filter housing and the cover. Use all-purpose cleaning spray. - Step 4
Unscrew the fasteners of the fuel filter cover. Use HEX No.H4. Use a ratchet wrench. - Step 5
Remove the fuel filter housing cover. - Step 6
Remove the fuel filter.Replacement: fuel filter – PEUGEOT 406 (8B). AUTODOC recommends:Be careful! Fuel may leak from the filter housing and hoses. - Step 7
Put the old filter cartridge in the container. - Step 8
Pump the fuel out of the fuel filter housing. Use a hand-operated fluid syringe. - Step 9
Install a new fuel filter.AUTODOC recommends:Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.PEUGEOT 406 (8B) – It's important to only use high-quality car parts. - Step 10
Install and tighten the cap of the fuel filter housing.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 406 Saloon model
Popular maintenance tutorials for Peugeot 406 Saloon
Complete guides for changing the Fuel filters on different PEUGEOT 406 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 406 (8B)
View more
How to inspect and troubleshoot your car heater when it’s not working
TOP 8 mistakes car owners make | AUTODOC tips
What to do if your car’s bonnet won’t open | AUTODOC tips
Top 7 signs of a bad starter
Most commonly replaced car parts on PEUGEOT 406
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























