Recommended replacement interval for the part category Fuel filter : 2 year / 60000 km

Important!

This replacement procedure can be used for:
HYUNDAI i30 CW (GD) 1.6 CRDi, HYUNDAI i30 CW (GD) 1.6 CRDi, HYUNDAI i30 CW (GD) 1.6 CRDi, HYUNDAI i30 CW (GD) 1.4 CRDi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Fuel Filter for i30 CW (GD) and other HYUNDAI models

Alternative products

Fuel filter

SKFF-0870078 STARK Fuel filter

7,16 GBP

Shop

9F0079 RIDEX Fuel filter

8,75 GBP

Shop

V52-9570 VAICO Fuel filter

10,67 GBP

Shop

ADG02333 BLUE PRINT Fuel filter

12,86 GBP

Shop

587735 VALEO Fuel filter

16,52 GBP

Shop

J1330519 HERTH+BUSS JAKOPARTS Fuel filter

18,07 GBP

Shop

9F0079P RIDEX PLUS Fuel filter

18,16 GBP

Shop

FC-H03S JAPANPARTS Fuel filter

18,68 GBP

Shop

CS767 PURFLUX Fuel filter

19,12 GBP

Shop

KC 101/1 MAHLE ORIGINAL Fuel filter

20,26 GBP

Shop

Replacement: fuel filter – HYUNDAI i30 CW (GD). Tools you'll need:

                      All-purpose cleaning spray
                    
                      Combination spanner #19
                    
                      Oil filter cup socket #76-14 F
                    
                      Ratchet wrench
                    
                      Flat Screwdriver
                    
                      Fuel line pliers
                    
                      Fluid container
                    
                      Fender cover

Buy tools

Replacement: fuel filter – HYUNDAI i30 CW (GD). AUTODOC experts recommend:

Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
Please note: all work on the car – HYUNDAI i30 CW (GD) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Open the bonnet.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Detach the fuel pressure sensor connector. Use fuel line pliers. Use a flat screwdriver.
Step 4

Clean the fasteners of the fuel supply lines. Use all-purpose cleaning spray.

Step 5

Squeeze the clips and detach the fuel supply lines from the fuel filter housing. Use fuel line pliers. Use a flat screwdriver.

Replacement: fuel filter – HYUNDAI i30 CW (GD). Professionals recommend:
Be careful! Fuel may leak from the filter housing and hoses.
Step 6

Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #19.
Step 7

Remove the fuel filter together with its bracket.
Step 8

Unscrew the water-in-fuel sensor.
Step 9

Prepare a container for fluids.

Step 10

Unscrew the fuel filter bracket. Use the 76-14 F socket. Use a ratchet wrench.
Step 11

Remove the fuel filter fastening bracket. Remove the fuel filter.

Replacement: fuel filter – HYUNDAI i30 CW (GD). AUTODOC experts recommend:
Be careful! Fuel may leak from the filter housing and hoses.
Step 12

Install a new fuel filter. Install the fuel filter fastening bracket.

Replacement: fuel filter – HYUNDAI i30 CW (GD). AUTODOC recommends:
Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.Attention! Use quality components. HYUNDAI i30 CW (GD)
Step 13

Screw in the fuel filter mounting bracket. Use the 76-14 F socket. Use a ratchet wrench.
Step 14

Install the new fuel filter together with its bracket.
Step 15

Screw in the water-in-fuel sensor.
Step 16

Screw the fixing bolts of the fuel filter bracket. Use a combination spanner #19.
Step 17

Clean the fuel filter. Use all-purpose cleaning spray.

Step 18

Connect the fuel lines to the fuel filter and lock the fastening clips.
Step 19

Attach the fuel pressure sensor connector.

Step 20

Remove the fender protection cover.

Step 21

Close the hood.

Replacement: fuel filter – HYUNDAI i30 CW (GD). Tip:
Before starting off, switch the ignition on and off several times. This should be done to activate the fuel pump to make it pump fuel through the fuel system.
Step 22

Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.

Step 23

Shut off the engine.

AUTODOC recommends:
To protect the environment from pollution, be sure to dispose of the used filters at special collection points.