Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.Attention! Use quality components. HYUNDAI ix35 (LM, EL, ELH)
Step 13
Screw in the fuel filter mounting bracket. Use the 76-14 F socket. Use a ratchet wrench.
Step 14
Install the new fuel filter together with its bracket.
Step 15
Screw in the water-in-fuel sensor.
Step 16
Screw the fixing bolts of the fuel filter bracket. Use a combination spanner #19.
Step 17
Clean the fuel filter. Use all-purpose cleaning spray.
Step 18
Connect the fuel lines to the fuel filter and lock the fastening clips.
Step 19
Attach the fuel pressure sensor connector.
Step 20
Remove the fender protection cover.
Step 21
Close the hood.
Replacement: fuel filter – HYUNDAI ix35 (LM, EL, ELH). Tip:
Before starting off, switch the ignition on and off several times. This should be done to activate the fuel pump to make it pump fuel through the fuel system.
Step 22
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 23
Shut off the engine.
AUTODOC recommends:
To protect the environment from pollution, be sure to dispose of the used filters at special collection points.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.