Disclaimer
How to change fuel filter on FIAT STILO Multi Wagon (192) – replacement guide
downloads:
4
Views:
155
Recommended replacement interval for the part category Fuel filter : 60000 km
Important!
This replacement procedure can be used for:
FIAT STILO Multi Wagon (192) 1.9 D, FIAT STILO Multi Wagon (192) 1.9 D Multijet (192DXT1B), FIAT STILO Multi Wagon (192) 1.9 D Multijet, FIAT STILO Multi Wagon (192) 1.9 JTD … View more
The steps may slightly vary depending on the car design.
FIAT STILO Multi Wagon (192) 1.9 D, FIAT STILO Multi Wagon (192) 1.9 D Multijet (192DXT1B), FIAT STILO Multi Wagon (192) 1.9 D Multijet, FIAT STILO Multi Wagon (192) 1.9 JTD … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for STILO Multi Wagon (192) and other FIAT models
Alternative products

All-purpose cleaning spray
Combination spanner #12
Drive socket # 10
Drive socket # 12
Ratchet wrench
Fuel line pliers
Bleeder kit
Fender cover
Replacement: fuel filter – FIAT STILO Multi Wagon (192). Professionals recommend:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- All work should be done with the engine stopped.
Replacement: fuel filter – FIAT STILO Multi Wagon (192). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Clean the fasteners of the fuel supply lines. Use all-purpose cleaning spray. - Step 4
Squeeze the clips and detach the fuel supply lines from the fuel filter housing. Use fuel line pliers.Replacement: fuel filter – FIAT STILO Multi Wagon (192). Tip from AUTODOC:Be careful! Fuel may leak from the filter housing and hoses. - Step 5
Loosen the fuel filter mounting. Use a drive socket #10. Use a ratchet wrench. - Step 6
Remove the fuel filter. - Step 7
Detach the fuel pressure sensor connector. - Step 8
Attach the fuel pressure sensor connector. - Step 9
Install a new fuel filter. - Step 10
Tighten the fuel filter fasteners. Use a drive socket #10. Use a ratchet wrench.Replacement: fuel filter – FIAT STILO Multi Wagon (192). Professionals recommend:Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.Attention! Use quality filters – FIAT STILO Multi Wagon (192). - Step 11
Connect the fuel lines to the fuel filter and lock the fastening clips.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Stilo Multi Wagon (192) model
Popular maintenance tutorials for Fiat Stilo Estate
Complete guides for changing the Fuel filters on different FIAT STILO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT STILO Multi Wagon (192)
View more
How to choose the right engine oil for your car | AUTODOC
Understanding Airbag Light Warnings | Essential Tips for Car Safety
Why Checking Your Oil is Crucial for Engine Performance
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Most commonly replaced car parts on FIAT STILO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















