Important!

This replacement procedure can be used for:
TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 4WD (ZRE154_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.5 (NZE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 2.2 D (ADE157_, ADE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 2.0 D-4D (ADE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.4 D-4D (NDE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.6 (ZRE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.4 (ZZE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.33 Dual-VVTi (NRE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.6 (ZRE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 Hybrid (ZWE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.33 Dual-VVTi (NRE150_) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) and other TOYOTA models

Alternative products

Wheel bearing kit

Replacement: wheel bearing – TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_). List of the tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Copper grease 
                    
                      Drive socket # 17 
                    
                      Drive socket # 18 
                    
                      Drive socket # 30 
                    
                      Wheel impact socket #21
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Flat chisel
                    
                      Tap wrench
                    
                      Hammer
                    
                      Pin punch
                    
                      Crow bar
                    
                      Hydraulic transmission jack
                    
                      Wheel chock

Buy tools

Replacement: wheel bearing – TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_). AUTODOC experts recommend:

Do not re-use the bearing assembly of your TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) car.
The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
Please note: all work on the car – TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Clean the wheel hub fastener. Use WD-40 spray.
Step 2

Unstake the fastener of the driveshaft. Use a pin punch. Use a hammer.
Step 3

Loosen the fastener of the driveshaft. Use a drive socket #30. Use a tap wrench.
Step 4

Secure the wheels with chocks.

Step 5

Loosen the wheel mounting bolts. Use wheel impact socket #21.
Step 6

Raise the front of the car and secure on supports.

Step 7

Unscrew the wheel bolts.

Replacement: wheel bearing – TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_). Tip:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 8

Remove the wheel.
Step 9

Spread the brake pads. Use a crowbar.
Step 10

Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
Step 11

Unscrew the caliper bracket fastening. Use a drive socket #17. Use a tap wrench.
Step 12

Remove the caliper bracket.

Replacement: wheel bearing – TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_). AUTODOC recommends:
Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.
Step 13

Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
Step 14

Remove the brake disc.
Step 15

Clean the fasteners connecting the ball joint to the suspension control arm. Use a wire brush. Use WD-40 spray.
Step 16

Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #17.
Step 17

Disconnect the spherical joint from the arm. Use a crowbar.

Step 18

Unscrew the fastener connecting the drive shaft to the wheel hub. Use a drive socket #30. Use a tap wrench.
Step 19

Treat the splines of the driveshaft CV joint. Use WD-40 spray.
Step 20

Remove the drive shaft. Use a pin punch. Use a hammer.

Replacement: wheel bearing – TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_). Tip from AUTODOC experts:
Make sure that the drive shaft is not unloaded (when the car is jacked).
Step 21

Prop up the steering knuckle. Use a hydraulic transmission jack.
Step 22

Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
Step 23

Unscrew the hub bearing mounting. Use a drive socket #17. Use a tap wrench.
Step 24

Remove the hub and the bearing together, since they are a sealed unit. Use a crowbar. Use a hammer.
Step 25

Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
Step 26

Install the new wheel hub with a bearing.
Step 27

Tighten the wheel hub bearing fasteners. Use a drive socket #17. Use a ratchet wrench.
Step 28

Tighten the fastener of the wheel hub bearing. Use a drive socket #17. Use a torque wrench. Tighten it to 96 nm torque.
Step 29

Treat the splines of the driveshaft CV joint. Use copper grease.
Step 30

Remove the support from under the steering knuckle.

AUTODOC recommends:
Replacement: wheel bearing – TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 31

Mount the drive shaft into the wheel hub.
Step 32

Attach the ball joint to the control arm. Use a crowbar.
Step 33

Screw the fasteners of the ball joint. Use a drive socket #17.
Step 34

Tighten the ball joint fastener. Use a drive socket #17. Use a torque wrench. Tighten it to 92 nm torque.
Step 35

Treat the hub where it contacts the brake disk. Use copper grease.
Step 36

Install the brake disc.
Step 37

Clean the mounting seats of the caliper and its bracket. Use a wire brush. Use WD-40 spray.

Step 38

Install the brake caliper bracket.
Step 39

Tighten the brake caliper bracket. Use a drive socket #18. Use a torque wrench. Tighten it to 98 nm torque.
Step 40

Screw the nut of the drive shaft. Use a drive socket #30. Use a tap wrench.
Step 41

Clean the brake disk surface. Use a wire brush.
Step 42

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 43

Install the wheel.

Replacement: wheel bearing – TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_). AUTODOC experts recommend:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 44

Screw in the wheel bolts. Use wheel impact socket #21.
Step 45

Lower the car.

Step 46

Tighten the drive shaft nut. Use a drive socket #30. Use a torque wrench. Tighten it to 216 nm torque.
Step 47

Restake the fastener of the driveshaft. Use a flat metal-working chisel. Use a hammer.
Step 48

Tighten the wheel bolts using a criss-cross pattern. Use a torque wrench. Tighten it to 103 Nm torque.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Auris Hatchback (E15) model

Toyota Auris E15 tyre size

How to change front lower arm on Toyota Auris E15 – replacement guide

Free download PDF
2.79 MB
How to change rear wheel bearing on Toyota Auris E15 – replacement guide

Free download PDF
2.26 MB
How to change track rod end on Toyota Auris E15 – replacement guide

Free download PDF
1.74 MB
How to change front anti roll bar links on Toyota Auris E15 – replacement guide

Free download PDF
1.22 MB
How to change rear brake pads on Toyota Auris E15 – replacement guide

Free download PDF
1.53 MB
How to change front brake pads on Toyota Auris E15 – replacement guide

Free download PDF
1.53 MB

How to change rear wheel bearing on Toyota Auris E15 – replacement guide

Free download PDF
2.26 MB
How to change rear wheel bearing on TOYOTA AURIS (NZE18_, ZRE18_) – replacement guide

Free download PDF
2.19 MB
How to change rear wheel bearing on TOYOTA Auris Estate (_E18_) – replacement guide

Free download PDF
2.19 MB
How to change wheel bearing on a car – replacement tutorial

Universal

Free download PDF
2.41 MB
How to change front wheel bearing on Toyota Yaris Mk2 – replacement guide

Free download PDF
3.78 MB
How to change front wheel bearing on Toyota Yaris P1 – replacement guide

Free download PDF
2.53 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide

4K views

Published on: 07/04/2022
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project

2K views

Published on: 04/03/2021
DIY starter repair | AUTODOC tips

131K views

Published on: 31/08/2023
The most common problems when buying a used car | AUTODOC

4K views

Published on: 10/11/2022