Important!
This replacement procedure can be used for:
FORD TRANSIT COURIER Kombi 1.6 TDCi, FORD TRANSIT COURIER Kombi 1.5 TDCi, FORD TRANSIT COURIER Kombi 1.0 EcoBoost View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel bearing – FORD TRANSIT COURIER Kombi. List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #13
Combination spanner #15
Drive socket # 10
Drive socket # 15
Drive socket # 18
Drive socket # 32
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Pin punch
Flat Screwdriver
Clip removal tool
Circlip pliers
Ball joint puller
Bearing separator
Bush and bearing driver set
Vice
Crow bar
Wheel chock
Replacement: wheel bearing – FORD TRANSIT COURIER Kombi. Professionals recommend:
  • Do not re-use the bearing assembly of your FORD TRANSIT COURIER Kombi car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Ford Transit Courier Estate 2014 - free PDF and video manuals
    Clean the fastener of the driveshaft. Use a wire brush. Use WD-40 spray.
  2. Step 2
    How to replace FORD TRANSIT COURIER Kombi 1.5 TDCi 2015 Wheel Bearing - step-by-step manuals and video guides
    Loosen the fastener of the driveshaft. Use a drive socket #32. Use a tap wrench.
  3. Step 3
    Ford Transit Courier Estate 1.6 TDCi 2016 Wheel Bearing replacement: free workshop manuals
    Secure the wheels with chocks.
  4. Step 4
    Changing Wheel Bearing on FORD TRANSIT COURIER Kombi 1.5 EcoBlue 2017 by yourself
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  5. Step 5
    Raise the front of the car and secure on supports.
    Step 6
    How to remove FORD TRANSIT COURIER 1.5 TDCi 2018 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. FORD TRANSIT COURIER Kombi
  6. Step 7
    How to replace Wheel Bearing on FORD TRANSIT COURIER Kombi 2019: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Ford Transit Courier Estate 1.0 EcoBoost 2020 - download illustrated guide
    Disconnect the brake hose holder from the shock absorber strut. Use a drive socket #10. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Wheel Bearing on FORD TRANSIT COURIER 2021? This free workshop manual will help you to do it yourself
    Detach the brake hose from the shock strut.
  9. Step 10
    Changing of Wheel Bearing on Ford Transit Courier Estate 2022 won't be an issue if you follow this illustrated step-by-step guide
    Spread the brake pads. Use a crowbar.
  10. Step 11
    FORD TRANSIT COURIER 1.5 TDCi Wheel Bearing replacement: online guides and video tutorials
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  11. Step 12
    Replacing Wheel Bearing on Ford Transit Courier Estate 2024 1.5 TDCi by yourself
    Unscrew the caliper bracket fastening. Use a drive socket #15. Use a tap wrench.
  12. Step 13
    TRANSIT COURIER Kombi 1.5 TDCi 2014 Wheel Bearing DIY replacement workshop manual
    Remove the brake caliper together with its bracket.
    Replacement: wheel bearing – FORD TRANSIT COURIER Kombi. AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  13. Step 14
    How to change Wheel Bearing on FORD TRANSIT COURIER Kombi 2015 - tips and tricks
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  14. Step 15
    Step-by-step recommendations for DIY replacement Ford Transit Courier Estate 2016 1.5 TDCi Wheel Bearing
    Remove the brake disc.
  15. Step 16
    DIY replacement of Wheel Bearing on FORD TRANSIT COURIER Kombi 1.0 EcoBoost 2017 is not an issue anymore with our step-by-step tutorial
    Disconnect the ABS sensor wiring.
  16. Step 17
    How to change Wheel Bearing on Ford Transit Courier Estate 2014 - free PDF and video manuals
    Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool.
  17. Step 18
    How to replace FORD TRANSIT COURIER Kombi 1.5 TDCi 2015 Wheel Bearing - step-by-step manuals and video guides
    Detach the ABS sensor connector.
  18. Step 19
    Ford Transit Courier Estate 1.6 TDCi 2016 Wheel Bearing replacement: free workshop manuals
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
  19. Step 20
    Changing Wheel Bearing on FORD TRANSIT COURIER Kombi 1.5 EcoBlue 2017 by yourself
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #15. Use a drive socket #18. Use a ratchet wrench.
  20. Step 21
    How to remove FORD TRANSIT COURIER 1.5 TDCi 2018 Wheel Bearing - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  21. Step 22
    How to replace Wheel Bearing on FORD TRANSIT COURIER Kombi 2019: download PDF manuals and video instructions
    Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #13. Use a drive socket #15. Use a tap wrench.
  22. Step 23
    How hard is it to do yourself: Wheel Bearing replacement on Ford Transit Courier Estate 1.0 EcoBoost 2020 - download illustrated guide
    Remove the fastening bolt.
  23. Step 24
    Need to know how to renew Wheel Bearing on FORD TRANSIT COURIER 2021? This free workshop manual will help you to do it yourself
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  24. Step 25
    Changing of Wheel Bearing on Ford Transit Courier Estate 2022 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #18. Use a ratchet wrench.
  25. Step 26
    FORD TRANSIT COURIER 1.5 TDCi Wheel Bearing replacement: online guides and video tutorials
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  26. Step 27
    Replacing Wheel Bearing on Ford Transit Courier Estate 2024 1.5 TDCi by yourself
    Disconnect the ball joint from the steering knuckle.
  27. Step 28
    TRANSIT COURIER Kombi 1.5 TDCi 2014 Wheel Bearing DIY replacement workshop manual
    Remove the fastening nut.
  28. Step 29
    How to change Wheel Bearing on FORD TRANSIT COURIER Kombi 2015 - tips and tricks
    Detach the driveshaft from the steering knuckle.
    Replacement: wheel bearing – FORD TRANSIT COURIER Kombi. Tip from AUTODOC:
    Make sure that the drive shaft is not unloaded (when the car is jacked).
  29. Step 30
    Step-by-step recommendations for DIY replacement Ford Transit Courier Estate 2016 1.5 TDCi Wheel Bearing
    Remove the fastening bolts.
  30. Step 31
    DIY replacement of Wheel Bearing on FORD TRANSIT COURIER Kombi 1.0 EcoBoost 2017 is not an issue anymore with our step-by-step tutorial
    Disconnect the steering knuckle from the shock absorber strut.
  31. Step 32
    Remove the steering knuckle together with the hub.
    Step 33
    How to change Wheel Bearing on Ford Transit Courier Estate 2014 - free PDF and video manuals
    Grip the wheel hub together with the bearing in a vice.
  32. Step 34
    How to replace FORD TRANSIT COURIER Kombi 1.5 TDCi 2015 Wheel Bearing - step-by-step manuals and video guides
    Remove the wheel hub from the steering knuckle. Use a pin punch. Use a hammer.
  33. Step 35
    Ford Transit Courier Estate 1.6 TDCi 2016 Wheel Bearing replacement: free workshop manuals
    Release the vice and take out the wheel hub together with the bearing.
  34. Step 36
    Changing Wheel Bearing on FORD TRANSIT COURIER Kombi 1.5 EcoBlue 2017 by yourself
    Pull the bearing inner race out of the wheel hub. Use a bearing separator. Use a pin punch. Use a hammer.
  35. Step 37
    How to remove FORD TRANSIT COURIER 1.5 TDCi 2018 Wheel Bearing - online easy-to-follow instructions
    Clean the wheel hub bearing retaining ring. Use a wire brush. Use WD-40 spray.
  36. Step 38
    How to replace Wheel Bearing on FORD TRANSIT COURIER Kombi 2019: download PDF manuals and video instructions
    Remove the wheel hub bearing retaining ring. Use circlip pliers. Use a flat screwdriver.
  37. Step 39
    How hard is it to do yourself: Wheel Bearing replacement on Ford Transit Courier Estate 1.0 EcoBoost 2020 - download illustrated guide
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  38. Step 40
    Need to know how to renew Wheel Bearing on FORD TRANSIT COURIER 2021? This free workshop manual will help you to do it yourself
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  39. Step 41
    Changing of Wheel Bearing on Ford Transit Courier Estate 2022 won't be an issue if you follow this illustrated step-by-step guide
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  40. Step 42
    FORD TRANSIT COURIER 1.5 TDCi Wheel Bearing replacement: online guides and video tutorials
    Press the new bearing in the steering knuckle.
    Replacement: wheel bearing – FORD TRANSIT COURIER Kombi. AUTODOC experts recommend:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  41. Step 43
    Treat the fasteners of the wheel hub bearing. Use WD-40 spray.
    Step 44
    Replacing Wheel Bearing on Ford Transit Courier Estate 2024 1.5 TDCi by yourself
    Install the wheel hub bearing retaining ring. Use circlip pliers.
  42. Step 45
    TRANSIT COURIER Kombi 1.5 TDCi 2014 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub on the steering knuckle. Use a bush and bearing driver set.
  43. Step 46
    Install the steering knuckle with a hub in assembly.
    Step 47
    How to change Wheel Bearing on FORD TRANSIT COURIER Kombi 2015 - tips and tricks
    Fix the shock absorber strut on the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Transit Courier Estate model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD TRANSIT COURIER Kombi Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY FORD TRANSIT COURIER Kombi Wheel Bearing replacement - online guide
Tips & tricks for your FORD TRANSIT COURIER Kombi
View more
  • How to change Wheel bearings on FORD TRANSIT COURIER Kombi 1.0 EcoBoost - replacement tricks
    How to Order Car Parts Online: Avoid These 5 Common Pitfalls
  • Changing Hub bearing Ford Transit Courier Estate 1.5 TDCi - Replacement Tips
    Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
  • Maintenance Hacks - FORD TRANSIT COURIER Kombi 1.6 TDCi Wheel bearing kit replacement guide
    Petrol or diesel: The engine showdown! | AUTODOC
  • Replace Wheel hub bearing on Ford Transit Courier Estate - free video tips
    How to remove scratches from car plastic | AUTODOC tips