
Disclaimer
How to change serpentine belt on FORD TRANSIT COURIER Kombi – replacement guide
downloads:
1
Views:
13

Recommended replacement interval for the part category Serpentine belt : 10 year / 180000 km
Important!
This replacement procedure can be used for:
FORD TRANSIT COURIER Kombi 1.5 EcoBlue, FORD TRANSIT COURIER Kombi 1.5 TDCi, FORD TRANSIT COURIER Kombi 1.5 TDCi, FORD TRANSIT COURIER Kombi 1.6 TDCi … View more
The steps may slightly vary depending on the car design.
FORD TRANSIT COURIER Kombi 1.5 EcoBlue, FORD TRANSIT COURIER Kombi 1.5 TDCi, FORD TRANSIT COURIER Kombi 1.5 TDCi, FORD TRANSIT COURIER Kombi 1.6 TDCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for TRANSIT COURIER Kombi and other FORD models
Serpentine belt
Alternative products

Combination spanner #15
Torx bit T30
Ratchet wrench
Fender cover
Replacement: serpentine belt – FORD TRANSIT COURIER Kombi. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – FORD TRANSIT COURIER Kombi. Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4Undo the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench.
- Step 5Remove the oil pan cover.
- Step 6Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
- Step 7Remove the V-ribbed belt.
- Step 8Return the tensioner pulley to its initial position.Replacement: serpentine belt – FORD TRANSIT COURIER Kombi. Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 9Install the V-ribbed belt.Replacement: serpentine belt – FORD TRANSIT COURIER Kombi. AUTODOC experts recommend:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 10Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.Step 11Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Courier Estate model
Popular maintenance tutorials for Ford Transit Courier Estate
Complete guides for changing the Alternator belt on different FORD TRANSIT COURIER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD TRANSIT COURIER Kombi
View more
- DIY vehicle AC compressor restoration
- 5 possible reasons why your car heater isn't working
- Top 5 car noises you shouldn't ignore
- DIY manual gearbox restoration | Drivetrain restoration – Part 3
Most commonly replaced car parts on FORD TRANSIT COURIER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME