Important!
This replacement procedure can be used for:
FIAT 500 C (312) 0.9 (312AXP1A), FIAT 500 C (312) 0.9 (312AXN1A, 312AXN11), FIAT 500 C (312) 1.4 (301J410), FIAT 500 C (312) 0.9 (312AXM1B), FIAT 500 C (312) 0.9 (312AXH1A), FIAT 500 C (312) 1.3 D Multijet (312CXE1A, 312AXE1A), FIAT 500 C (312) 1.4 (312CXC1B, 312AXC1B), FIAT 500 C (312) 1.3 D Multijet (312CXB1A), FIAT 500 C (312) 1.2 (312CXA1A, 312AXA1A), FIAT 500 C (312) 0.9 (312AG1A) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for 500 C (312) and other FIAT models
Alternative products
How to change Top strut mount on Fiat 500 Convertible 1.2 (312CXA1A, 312AXA1A) – step-by-step instructions for straightforward car repair Top strut mount
How to change Repair kit, suspension strut on Fiat 500 Convertible 1.2 (312CXA1A, 312AXA1A) – step-by-step instructions for straightforward car repair Repair kit, suspension strut
Tools
Replacement: strut mount – FIAT 500 C (312). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #15
Combination spanner #16
Combination spanner #27
Drive socket # 16
Drive socket # 17
Drive socket # 18
Drive socket # 19
HEX bit No.H6
HEX bit No.H7
Wheel impact socket #17
Ratchet wrench
Crow bar
Hydraulic strut spring compressor
Hydraulic transmission jack
Fender cover
Wheel chock
Replacement: strut mount – FIAT 500 C (312). AUTODOC recommends:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • All mounts of the front shock struts should be replaced simultaneously.
  • Please note: all work on the car – FIAT 500 C (312) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Strut Mount on Fiat 500 Convertible 2009 - free PDF and video manuals
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
  2. Step 4
    How to replace FIAT 500 C (312) 1.2 (312CXA1A, 312AXA1A) 2010 Strut Mount - step-by-step manuals and video guides
    Loosen the upper fastener of the shock strut mount. Use HEX No.H7. Use a drive socket #19. Use a ratchet wrench.
  3. Step 5
    Fiat 500 Convertible 0.9 (312AG1A) 2011 Strut Mount replacement: free workshop manuals
    Secure the wheels with chocks.
  4. Step 6
    Changing Strut Mount on FIAT 500 C (312) 1.3 D Multijet (312CXE1A, 312AXE1A) 2012 by yourself
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  5. Step 7
    Raise the front of the car and secure on supports.
    Step 8
    How to remove FIAT 500 1.3 D Multijet (312CXB1A) 2013 Strut Mount - online easy-to-follow instructions
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT 500 C (312)
  6. Step 9
    How to replace Strut Mount on FIAT 500 C (312) 2014: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 10
    How hard is it to do yourself: Strut Mount replacement on Fiat 500 Convertible 0.9 (312AXN1A, 312AXN11) 2015 - download illustrated guide
    Detach the brake hose from the shock strut. Disconnect the ABS sensor wiring. Use a crowbar.
  8. Step 11
    Need to know how to renew Strut Mount on FIAT 500 2016? This free workshop manual will help you to do it yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 12
    Changing of Strut Mount on Fiat 500 Convertible 2017 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use HEX No.H6. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  10. Step 13
    FIAT 500 0.9 (312AXP1A) Strut Mount replacement: online guides and video tutorials
    Remove the stabilizer rod.
  11. Step 14
    Replacing Strut Mount on Fiat 500 Convertible 2019 1.2 (312CXA1A, 312AXA1A) by yourself
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
  12. Step 15
    500 C (312) 1.3 D Multijet (312CXB1A) 2020 Strut Mount DIY replacement workshop manual
    Unscrew the fasteners connecting the suspension strut to the steering knuckle. Use a combination spanner #15. Use a drive socket #17. Use a ratchet wrench.
  13. Step 16
    How to change Strut Mount on FIAT 500 C (312) 2021 - tips and tricks
    Remove the fastening bolt.
  14. Step 17
    Step-by-step recommendations for DIY replacement Fiat 500 Convertible 2022 1.3 D Multijet (312CXB1A) Strut Mount
    Prop up the steering knuckle. Use a hydraulic transmission jack.
  15. Step 18
    DIY replacement of Strut Mount on FIAT 500 C (312) 1.4 (312CXC1B, 312AXC1B) 2023 is not an issue anymore with our step-by-step tutorial
    Remove the fastening bolt.
  16. Step 19
    How to change Strut Mount on Fiat 500 Convertible 2009 - free PDF and video manuals
    Disconnect the steering knuckle from the shock absorber strut. Use a crowbar.
  17. Step 20
    How to replace FIAT 500 C (312) 1.2 (312CXA1A, 312AXA1A) 2010 Strut Mount - step-by-step manuals and video guides
    Unscrew the top fastening of the shock strut mount.
    AUTODOC recommends:
    FIAT 500 C (312) – To avoid injury, hold the suspension strut while unscrewing the fastening bolts.
  18. Step 21
    Fiat 500 Convertible 0.9 (312AG1A) 2011 Strut Mount replacement: free workshop manuals
    Remove the suspension strut.
  19. Step 22
    Changing Strut Mount on FIAT 500 C (312) 1.3 D Multijet (312CXE1A, 312AXE1A) 2012 by yourself
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – FIAT 500 C (312). Tip from AUTODOC:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  20. Step 23
    How to remove FIAT 500 1.3 D Multijet (312CXB1A) 2013 Strut Mount - online easy-to-follow instructions
    Compress the spring.
  21. Step 24
    How to replace Strut Mount on FIAT 500 C (312) 2014: download PDF manuals and video instructions
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
  22. Step 25
    How hard is it to do yourself: Strut Mount replacement on Fiat 500 Convertible 0.9 (312AXN1A, 312AXN11) 2015 - download illustrated guide
    Remove the strut piston rod nut. Use a combination spanner #27. Use HEX No.H7. Use a ratchet wrench.
  23. Step 26
    Need to know how to renew Strut Mount on FIAT 500 2016? This free workshop manual will help you to do it yourself
    Remove the top strut mount.
    AUTODOC recommends:
    Replacement: strut mount – FIAT 500 C (312). Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.
  24. Step 27
    Changing of Strut Mount on Fiat 500 Convertible 2017 won't be an issue if you follow this illustrated step-by-step guide
    Install a new top shock strut mount.
  25. Step 28
    FIAT 500 0.9 (312AXP1A) Strut Mount replacement: online guides and video tutorials
    Tighten the shock strut piston rod nut. Use a combination spanner #27. Use HEX No.H6. Use a torque wrench. Tighten it to 45 Nm torque.
    Replacement: strut mount – FIAT 500 C (312). Professionals recommend:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  26. Step 29
    Replacing Strut Mount on Fiat 500 Convertible 2019 1.2 (312CXA1A, 312AXA1A) by yourself
    Decompress the spring.
  27. Step 30
    500 C (312) 1.3 D Multijet (312CXB1A) 2020 Strut Mount DIY replacement workshop manual
    Treat the shock strut rod. Use copper grease.
  28. Step 31
    How to change Strut Mount on FIAT 500 C (312) 2021 - tips and tricks
    Remove the assembled shock strut.
  29. Step 32
    Step-by-step recommendations for DIY replacement Fiat 500 Convertible 2022 1.3 D Multijet (312CXB1A) Strut Mount
    Treat the mounting seats of the shock strut. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT 500 C Convertible (312) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT 500 C (312) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY FIAT 500 C (312) Strut Mount replacement - online guide
Tips & tricks for your FIAT 500 C (312)
View more
  • How to change Strut mount on FIAT 500 C (312) 1.4 (312CXC1B, 312AXC1B) - replacement tricks
    5 tools that make car repair incredibly simple | AUTODOC tips
  • Changing Top mount Fiat 500 Convertible 1.2 (312CXA1A, 312AXA1A) - Replacement Tips
    5 common car washing mistakes | AUTODOC tips
  • Maintenance Hacks - FIAT 500 C (312) 0.9 (312AG1A) Top strut mount replacement guide
    How to unlock your car without a key | AUTODOC tips
  • Replace Top mounts on Fiat 500 Convertible - free video tips
    Coolant comparison test | AUTODOC