Important!
This replacement procedure can be used for:
FIAT 500 C (312) 0.9 (312AG1A), FIAT 500 C (312) 1.2 (312CXA1A, 312AXA1A), FIAT 500 C (312) 1.3 D Multijet (312CXB1A), FIAT 500 C (312) 1.4 (312CXC1B, 312AXC1B), FIAT 500 C (312) 1.3 D Multijet (312CXE1A, 312AXE1A), FIAT 500 C (312) 0.9 (312AXH1A), FIAT 500 C (312) 0.9 (312AXM1B), FIAT 500 C (312) 1.4 (301J410), FIAT 500 C (312) 0.9 (312AXN1A, 312AXN11), FIAT 500 C (312) 0.9 (312AXP1A), FIAT 500 C (312) 1.4 (301J410), FIAT 500 C (312) 1.4 Flex (301OB6), FIAT 500 C (312) 1.4 Flex (301OB6), FIAT 500 C (312) 1.0 Mild Hybrid (312.AYD1B) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for 500 C (312) and other FIAT models
How to change Wheel bearing kit on Fiat 500 Convertible 1.2 (312CXA1A, 312AXA1A) – step-by-step instructions for straightforward car repair
Wheel bearing kit
How to change Wheel bearing on Fiat 500 Convertible 1.2 (312CXA1A, 312AXA1A) – step-by-step instructions for straightforward car repair
Wheel bearing
Tools
Replacement: wheel bearing – FIAT 500 C (312). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
All-purpose cleaning spray
Copper grease
Drive socket # 12
Drive socket # 13
Drive socket # 17
Drive socket # 32
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – FIAT 500 C (312). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your FIAT 500 C (312) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – FIAT 500 C (312). Use the following procedure:
  1. Step 1
    How to change Wheel Bearing on Fiat 500 Convertible 2009 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FIAT 500 C (312) 1.2 (312CXA1A, 312AXA1A) 2010 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Fiat 500 Convertible 0.9 (312AG1A) 2011 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT 500 C (312)
  4. Step 5
    Changing Wheel Bearing on FIAT 500 C (312) 1.3 D Multijet (312CXE1A, 312AXE1A) 2012 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FIAT 500 1.3 D Multijet (312CXB1A) 2013 Wheel Bearing - online easy-to-follow instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on FIAT 500 C (312) 2014: download PDF manuals and video instructions
    Unscrew the brake caliper fastening. Use a drive socket #13. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Fiat 500 Convertible 0.9 (312AXN1A, 312AXN11) 2015 - download illustrated guide
    Remove the brake caliper. Use a crowbar.
    Replacement: wheel bearing – FIAT 500 C (312). AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  8. Step 9
    Need to know how to renew Wheel Bearing on FIAT 500 2016? This free workshop manual will help you to do it yourself
    Remove the brake pads.
  9. Step 10
    Changing of Wheel Bearing on Fiat 500 Convertible 2017 won't be an issue if you follow this illustrated step-by-step guide
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  10. Step 11
    FIAT 500 0.9 (312AXP1A) Wheel Bearing replacement: online guides and video tutorials
    Unscrew the caliper bracket fastening. Use a drive socket #17. Use a tap wrench.
  11. Step 12
    Replacing Wheel Bearing on Fiat 500 Convertible 2019 1.2 (312CXA1A, 312AXA1A) by yourself
    Remove the caliper bracket.
  12. Step 13
    500 C (312) 1.3 D Multijet (312CXB1A) 2020 Wheel Bearing DIY replacement workshop manual
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Wheel Bearing on FIAT 500 C (312) 2021 - tips and tricks
    Unscrew the brake disc fastening. Use a drive socket #12. Use a ratchet wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement Fiat 500 Convertible 2022 1.3 D Multijet (312CXB1A) Wheel Bearing
    Remove the brake disc. Use a rubber mallet.
  15. Step 16
    DIY replacement of Wheel Bearing on FIAT 500 C (312) 1.4 (312CXC1B, 312AXC1B) 2023 is not an issue anymore with our step-by-step tutorial
    Remove the hub bearing protection cap. Use a crowbar. Use a hammer.
    Replacement: wheel bearing – FIAT 500 C (312). Tip from AUTODOC experts:
    Some cars are not equipped with wheel hub caps.
  16. Step 17
    How to change Wheel Bearing on Fiat 500 Convertible 2009 - free PDF and video manuals
    Unscrew the wheel hub axle nut. Use a drive socket #32. Use a tap wrench.
  17. Step 18
    How to replace FIAT 500 C (312) 1.2 (312CXA1A, 312AXA1A) 2010 Wheel Bearing - step-by-step manuals and video guides
    Remove the hub and the bearing together, since they are a sealed unit.
  18. Step 19
    Fiat 500 Convertible 0.9 (312AG1A) 2011 Wheel Bearing replacement: free workshop manuals
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  19. Step 20
    Changing Wheel Bearing on FIAT 500 C (312) 1.3 D Multijet (312CXE1A, 312AXE1A) 2012 by yourself
    Install the new wheel hub with a bearing.
  20. Step 21
    How to remove FIAT 500 1.3 D Multijet (312CXB1A) 2013 Wheel Bearing - online easy-to-follow instructions
    Tighten the hub. Use a drive socket #32. Use a torque wrench. Tighten it to 224 Nm torque.
    Replacement: wheel bearing – FIAT 500 C (312). Tip:
    The wheel bearing unit must not tilt on the axle pin.
  21. Step 22
    How to replace Wheel Bearing on FIAT 500 C (312) 2014: download PDF manuals and video instructions
    Install the hub bearing protection cap. Use a rubber mallet.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT 500 C (312) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT 500 C (312) Wheel Bearing replacement - online guide
Tips & tricks for your FIAT 500 C (312)
View more
  • How to change Wheel bearings on FIAT 500 C (312) 1.4 (312CXC1B, 312AXC1B) - replacement tricks
    DIY brake caliper restoration | AUTODOC tips
  • Changing Hub bearing Fiat 500 Convertible 1.2 (312CXA1A, 312AXA1A) - Replacement Tips
    Coolant comparison test | AUTODOC
  • Maintenance Hacks - FIAT 500 C (312) 0.9 (312AG1A) Wheel bearing kit replacement guide
    How to choose the right engine oil for your car | AUTODOC
  • Replace Wheel hub bearing on Fiat 500 Convertible - free video tips
    5 car tips for a winter's day | AUTODOC tips