Disclaimer
How to change front lower arm on FORD KA+ Saloon (TK, FK) – replacement guide
downloads:
3
Views:
90
Important!
This replacement procedure can be used for:
FORD KA+ Saloon (TK, FK) 1.5, FORD KA+ Saloon (TK, FK) 1.2, FORD KA+ Saloon (TK, FK) 1.2 (TK) … View more
The steps may slightly vary depending on the car design.
FORD KA+ Saloon (TK, FK) 1.5, FORD KA+ Saloon (TK, FK) 1.2, FORD KA+ Saloon (TK, FK) 1.2 (TK) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for KA+ Saloon (TK, FK) and other FORD models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #13
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Flat chisel
Hammer
Rubber mallet
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – FORD KA + Saloon. AUTODOC experts recommend:
- The replacement procedure is identical for the left and right lower control arms.
- Warning! Shut down the engine before starting any work – FORD KA + Saloon.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD KA + Saloon - Step 5
Remove the wheel. - Step 6
Clean all joints of the arm. Use a wire brush. Use WD-40 spray.Replacement: front lower arm – FORD KA + Saloon. Tip:After applying the spray, wait a few minutes. - Step 7
Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #13. Use a drive socket #15. Use a tap wrench. - Step 8
Remove the fastening bolt. - Step 9
Unscrew the front arm fastener. Use a drive socket #15. Use a tap wrench. - Step 10
Unscrew the rear fastener connecting the control arm to the subframe. Use a drive socket #13. Use a tap wrench. - Step 11
Remove the rear fastener of the control arm. - Step 12
Release the fastener connecting the ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer. - Step 13
Disconnect the ball joint from the steering knuckle. - Step 14
Remove the front fastener of the control arm. - Step 15
Remove the arm. - Step 16
Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray. - Step 17
Install a new arm. Use a rubber mallet.Replacement: front lower arm – FORD KA + Saloon. AUTODOC recommends:During the installation process, use only new bolts and nuts.Do not damage the ball joint cover. - Step 18
Install the control arm fasteners. - Step 19Connect the ball joint to the steering knuckle.Step 20
Support the arm. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD KA+ Saloon (TK, FK) model
Popular maintenance tutorials for FORD KA + Saloon
Complete guides for changing the Control arm on different FORD KA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD KA+ Saloon (TK, FK)
View more
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
DIY brake caliper restoration | AUTODOC tips
DIY rear axle restoration | Drivetrain restoration – Part 2
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
Most commonly replaced car parts on FORD KA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



































