
Disclaimer
How to change front lower arm on FIAT Fiorino MPV (225) – replacement guide
downloads:
2
Views:
32
Important!
This replacement procedure can be used for:
FIAT Fiorino MPV (225) 1.4 CNG (225AXC1A, 225BXC1A), FIAT Fiorino MPV (225) 1.3 JTD Multijet (225BXB1A, 225BXB11) … View more
The steps may slightly vary depending on the car design.
FIAT Fiorino MPV (225) 1.4 CNG (225AXC1A, 225BXC1A), FIAT Fiorino MPV (225) 1.3 JTD Multijet (225BXB1A, 225BXB11) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for Fiorino MPV (225) and other FIAT models
Suspension arm
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Combination spanner #18
Drive socket # 16
Drive socket # E18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat chisel
Hammer
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – FIAT Fiorino MPV (225). AUTODOC recommends:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – FIAT Fiorino MPV (225). Take the following steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. FIAT Fiorino MPV (225)
- Step 5Remove the wheel.
- Step 6Clean all joints of the arm. Use a wire brush. Use WD-40 spray.Replacement: front lower arm – FIAT Fiorino MPV (225). Tip:After applying the spray, wait a few minutes.Wear protective goggles.
- Step 7Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a tap wrench.
- Step 8Remove the fastening bolt.
- Step 9Unscrew the front arm fastener. Use a drive socket #E18. Use a tap wrench.
- Step 10Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #18. Use a drive socket #E18. Use a tap wrench.
- Step 11Remove the fastening bolts. Use a drive socket #E18. Use a ratchet wrench.
- Step 12Release the fastener connecting the ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
- Step 13Disconnect the ball joint from the steering knuckle.
- Step 14Remove the arm.
- Step 15Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
- Step 16Install a new arm.Replacement: front lower arm – FIAT Fiorino MPV (225). AUTODOC experts recommend:During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
- Step 17Install the fastening bolts. Use a combination spanner #18. Use a drive socket #E18. Use a tap wrench.
- Step 18Screw the rear fastener connecting the control arm to the subframe. Use a combination spanner #18. Use a drive socket #E18. Use a ratchet wrench.
- Step 19Support the arm. Use a hydraulic transmission jack.
- Step 20Connect the ball joint to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Fiorino MPV (225) model
Popular maintenance tutorials for FIAT Fiorino MPV (225)
Complete guides for changing the Control arm on different FIAT FIORINO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT Fiorino MPV (225)
View more
- TOP 8 mistakes car owners make | AUTODOC tips
- Don’t Replace, Restore: Fixing Damaged Threads at Home
- The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
- How to tighten cylinder head bolts
Most commonly replaced car parts on FIAT FIORINO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME