Important!
This replacement procedure can be used for:
AUDI Cabriolet (8G7, B4) 1.8, AUDI Cabriolet (8G7, B4) 1.9 TDI, AUDI Cabriolet (8G7, B4) 2.0 16V, AUDI Cabriolet (8G7, B4) 2.8, AUDI Cabriolet (8G7, B4) 2.6, AUDI Cabriolet (8G7, B4) 2.3 E, AUDI Cabriolet (8G7, B4) 2.0 E View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: front lower arm – AUDI CABRIOLET (8G7, B4). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Drive socket # 17
Combination spanner #17
Wheel impact socket #17
Ratchet wrench
Flat Screwdriver
Rubber mallet
Wheel chock
Replacement: front lower arm – AUDI CABRIOLET (8G7, B4). AUTODOC recommends:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: front lower arm – AUDI CABRIOLET (8G7, B4). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on Audi Cabriolet 8g7 b4 1991 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI Cabriolet (8G7, B4) 2.3 E 1992 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Audi Cabriolet 8g7 b4 2.0 E 1993 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI CABRIOLET (8G7, B4)
  4. Step 5
    Changing Control Arm on AUDI Cabriolet (8G7, B4) 1.8 1994 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI CABRIOLET 1.9 TDI 1995 Control Arm - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Control Arm on AUDI Cabriolet (8G7, B4) 1996: download PDF manuals and video instructions
    Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Audi Cabriolet 8g7 b4 2.0 16V 1997 - download illustrated guide
    Remove the fastening bolt.
  8. Step 9
    Need to know how to renew Control Arm on AUDI CABRIOLET 1998? This free workshop manual will help you to do it yourself
    Unscrew the front arm fastener. Use a combination spanner #17 (2 pieces).
  9. Step 10
    Remove the front fastener of the control arm.
    Step 11
    Changing of Control Arm on Audi Cabriolet 8g7 b4 1999 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #17 (2 pieces).
  10. Step 12
    Remove the rear fastener of the control arm.
    Step 13
    AUDI CABRIOLET 2.0 E Control Arm replacement: online guides and video tutorials
    Disconnect the ball joint from the steering knuckle. Use a rubber mallet.
  11. Step 14
    Replacing Control Arm on Audi Cabriolet 8g7 b4 1991 2.3 E by yourself
    Remove the arm.
  12. Step 15
    Cabriolet (8G7, B4) 1.9 TDI 1992 Control Arm DIY replacement workshop manual
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  13. Step 16
    How to change Control Arm on AUDI Cabriolet (8G7, B4) 1993 - tips and tricks
    Remove the ball joint. Use a rubber mallet.
  14. Step 17
    Step-by-step recommendations for DIY replacement Audi Cabriolet 8g7 b4 1994 1.9 TDI Control Arm
    Attach the ball joint to the control arm. Use a rubber mallet. Use a flat screwdriver.
  15. Step 18
    DIY replacement of Control Arm on AUDI Cabriolet (8G7, B4) 2.6 1995 is not an issue anymore with our step-by-step tutorial
    Tighten the fasteners connecting the ball joint to the control arm. Use a combination spanner #17. Use a drive socket #17. Use a torque wrench. Tighten it to 65 Nm torque.
  16. Step 19
    Clean the suspension arm mounting seats. Use a wire brush. Use WD-40 spray.
    Step 20
    How to change Control Arm on Audi Cabriolet 8g7 b4 1991 - free PDF and video manuals
    Install a new arm. Use a rubber mallet.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Cabriolet B4 (8G7) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI Cabriolet (8G7, B4) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI Cabriolet (8G7, B4) Control Arm replacement - online guide
Tips & tricks for your AUDI Cabriolet (8G7, B4)
View more
  • How to change Control arm on AUDI Cabriolet (8G7, B4) 2.6 - replacement tricks
    Coolant comparison test | AUTODOC
  • Changing Wishbone Audi Cabriolet 8g7 b4 2.3 E - Replacement Tips
    How to check your head gasket | AUTODOC
  • Maintenance Hacks - AUDI Cabriolet (8G7, B4) 2.0 E Control arms replacement guide
    How to save when buying car parts
  • Replace Trailing arm on Audi Cabriolet 8g7 b4 - free video tips
    Things you should never do with your manual transmission | AUTODOC tips

Professional manuals for the most common AUDI models