Important!
This replacement procedure can be used for:
AUDI 80 Avant (8C5, B4) 2.0, AUDI 80 Avant (8C5, B4) 2.0 E, AUDI 80 Avant (8C5, B4) 2.0 E 16V, AUDI 80 Avant (8C5, B4) 2.3 E, AUDI 80 Avant (8C5, B4) 2.6, AUDI 80 Avant (8C5, B4) S2 quattro, AUDI 80 Avant (8C5, B4) 2.6 quattro, AUDI 80 Avant (8C5, B4) 2.8 quattro, AUDI 80 Avant (8C5, B4) RS2 quattro, AUDI 80 Avant (8C5, B4) 2.3 E quattro, AUDI 80 Avant (8C5, B4) 1.9 TDI, AUDI 80 Avant (8C5, B4) 1.6 E, AUDI 80 Avant (8C5, B4) 2.8, AUDI 80 Avant (8C5, B4) 2.0 E 16V quattro, AUDI 80 Avant (8C5, B4) 1.9 TD, AUDI 80 Avant (8C5, B4) 2.0 quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for 80 Avant (8C5, B4) and other AUDI models
Alternative products
How to change Suspension arm on Audi 80 B4 Avant 1.9 TDI – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: front lower arm – AUDI 80 Avant (8C, B4). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Drive socket # 17
Combination spanner #17
Wheel impact socket #17
Ratchet wrench
Flat Screwdriver
Rubber mallet
Wheel chock
Replacement: front lower arm – AUDI 80 Avant (8C, B4). AUTODOC recommends:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: front lower arm – AUDI 80 Avant (8C, B4). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on Audi 80 B4 Avant 1991 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI 80 Avant (8C5, B4) 1.9 TDI 1992 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Audi 80 B4 Avant 2.0 E 1993 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI 80 Avant (8C, B4)
  4. Step 5
    Changing Control Arm on AUDI 80 Avant (8C5, B4) 2.0 1994 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI 80 2.6 quattro 1995 Control Arm - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Control Arm on AUDI 80 Avant (8C5, B4) 1996: download PDF manuals and video instructions
    Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Audi 80 B4 Avant 2.3 E quattro 1991 - download illustrated guide
    Remove the fastening bolt.
  8. Step 9
    Need to know how to renew Control Arm on AUDI 80 1992? This free workshop manual will help you to do it yourself
    Unscrew the front arm fastener. Use a combination spanner #17 (2 pieces).
  9. Step 10
    Remove the front fastener of the control arm.
    Step 11
    Changing of Control Arm on Audi 80 B4 Avant 1993 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #17 (2 pieces).
  10. Step 12
    Remove the rear fastener of the control arm.
    Step 13
    AUDI 80 2.6 Control Arm replacement: online guides and video tutorials
    Disconnect the ball joint from the steering knuckle. Use a rubber mallet.
  11. Step 14
    Replacing Control Arm on Audi 80 B4 Avant 1995 1.9 TDI by yourself
    Remove the arm.
  12. Step 15
    80 Avant (8C5, B4) 2.6 quattro 1996 Control Arm DIY replacement workshop manual
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  13. Step 16
    How to change Control Arm on AUDI 80 Avant (8C5, B4) 1991 - tips and tricks
    Remove the ball joint. Use a rubber mallet.
  14. Step 17
    Step-by-step recommendations for DIY replacement Audi 80 B4 Avant 1992 2.6 quattro Control Arm
    Attach the ball joint to the control arm. Use a rubber mallet. Use a flat screwdriver.
  15. Step 18
    DIY replacement of Control Arm on AUDI 80 Avant (8C5, B4) S2 quattro 1993 is not an issue anymore with our step-by-step tutorial
    Tighten the fasteners connecting the ball joint to the control arm. Use a combination spanner #17. Use a drive socket #17. Use a torque wrench. Tighten it to 65 Nm torque.
  16. Step 19
    Clean the suspension arm mounting seats. Use a wire brush. Use WD-40 spray.
    Step 20
    How to change Control Arm on Audi 80 B4 Avant 1991 - free PDF and video manuals
    Install a new arm. Use a rubber mallet.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI 80 B4 Avant (8C5) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI 80 Avant (8C5, B4) Control Arm replacement - online guide
Tips & tricks for your AUDI 80 Avant (8C5, B4)
View more
  • How to change Control arm on AUDI 80 Avant (8C5, B4) S2 quattro - replacement tricks
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
  • Changing Wishbone Audi 80 B4 Avant 1.9 TDI - Replacement Tips
    Initial Car Inspection: What to Check Before You Buy
  • Maintenance Hacks - AUDI 80 Avant (8C5, B4) 2.0 E Control arms replacement guide
    How to Install a New Windscreen Yourself | AUTODOC Expert Tips
  • Replace Trailing arm on Audi 80 B4 Avant - free video tips
    How to replace a timing chain yourself

Professional manuals for the most common AUDI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI 80 Avant (8C5, B4) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME