Disclaimer
How to change front anti roll bar links on AUDI 80 B4 Avant (8C5) – replacement guide
downloads:
0
Views:
4
Important!
This replacement procedure can be used for:
AUDI 80 Avant (8C5, B4) 2.0, AUDI 80 Avant (8C5, B4) 2.0 E, AUDI 80 Avant (8C5, B4) 2.0 E 16V, AUDI 80 Avant (8C5, B4) 2.3 E, AUDI 80 Avant (8C5, B4) 2.6, AUDI 80 Avant (8C5, B4) S2 quattro, AUDI 80 Avant (8C5, B4) 2.6 quattro, AUDI 80 Avant (8C5, B4) 2.8 quattro, AUDI 80 Avant (8C5, B4) RS2 quattro, AUDI 80 Avant (8C5, B4) 2.3 E quattro, AUDI 80 Avant (8C5, B4) 1.9 TDI, AUDI 80 Avant (8C5, B4) 1.6 E, AUDI 80 Avant (8C5, B4) 2.8, AUDI 80 Avant (8C5, B4) 2.0 E 16V quattro, AUDI 80 Avant (8C5, B4) 1.9 TD, AUDI 80 Avant (8C5, B4) 2.0 quattro … View more
The steps may slightly vary depending on the car design.
AUDI 80 Avant (8C5, B4) 2.0, AUDI 80 Avant (8C5, B4) 2.0 E, AUDI 80 Avant (8C5, B4) 2.0 E 16V, AUDI 80 Avant (8C5, B4) 2.3 E, AUDI 80 Avant (8C5, B4) 2.6, AUDI 80 Avant (8C5, B4) S2 quattro, AUDI 80 Avant (8C5, B4) 2.6 quattro, AUDI 80 Avant (8C5, B4) 2.8 quattro, AUDI 80 Avant (8C5, B4) RS2 quattro, AUDI 80 Avant (8C5, B4) 2.3 E quattro, AUDI 80 Avant (8C5, B4) 1.9 TDI, AUDI 80 Avant (8C5, B4) 1.6 E, AUDI 80 Avant (8C5, B4) 2.8, AUDI 80 Avant (8C5, B4) 2.0 E 16V quattro, AUDI 80 Avant (8C5, B4) 1.9 TD, AUDI 80 Avant (8C5, B4) 2.0 quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for 80 Avant (8C5, B4) and other AUDI models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Combination spanner #16
Combination spanner #17
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – AUDI 80 Avant (8C, B4). AUTODOC recommends:
- Replace the stabiliser links on AUDI 80 Avant (8C, B4) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – AUDI 80 Avant (8C, B4) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI 80 Avant (8C, B4) - Step 5
Remove the wheel. - Step 6
Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use a drive socket #17. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a combination spanner #17. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – AUDI 80 Avant (8C, B4). AUTODOC experts recommend:Examine the stabiliser bushes. Replace them if necessary. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new stabiliser link and tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI 80 B4 Avant (8C5) model
Popular maintenance tutorials for Audi 80 B4 Avant
Complete guides for changing the Drop links on different AUDI 80 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI 80 Avant (8C5, B4)
View more
Top 5 possible reasons your car is shaking or vibrating
DIY engine block coffee table
DIY manual gearbox restoration | Drivetrain restoration – Part 3
DIY starter repair | AUTODOC tips
Most commonly replaced car parts on AUDI 80
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























