
Disclaimer
How to change rear anti roll bar links on AUDI 80 B4 Avant (8C5) – replacement guide
downloads:
0
Views:
3
Important!
This replacement procedure can be used for:
AUDI 80 Avant (8C5, B4) 2.0, AUDI 80 Avant (8C5, B4) 2.0 E, AUDI 80 Avant (8C5, B4) 2.0 E 16V, AUDI 80 Avant (8C5, B4) 2.3 E, AUDI 80 Avant (8C5, B4) 2.6, AUDI 80 Avant (8C5, B4) S2 quattro, AUDI 80 Avant (8C5, B4) 2.6 quattro, AUDI 80 Avant (8C5, B4) 2.8 quattro, AUDI 80 Avant (8C5, B4) RS2 quattro, AUDI 80 Avant (8C5, B4) 2.3 E quattro, AUDI 80 Avant (8C5, B4) 1.9 TDI, AUDI 80 Avant (8C5, B4) 1.6 E, AUDI 80 Avant (8C5, B4) 2.8, AUDI 80 Avant (8C5, B4) 2.0 E 16V quattro, AUDI 80 Avant (8C5, B4) 1.9 TD, AUDI 80 Avant (8C5, B4) 2.0 quattro … View more
The steps may slightly vary depending on the car design.
AUDI 80 Avant (8C5, B4) 2.0, AUDI 80 Avant (8C5, B4) 2.0 E, AUDI 80 Avant (8C5, B4) 2.0 E 16V, AUDI 80 Avant (8C5, B4) 2.3 E, AUDI 80 Avant (8C5, B4) 2.6, AUDI 80 Avant (8C5, B4) S2 quattro, AUDI 80 Avant (8C5, B4) 2.6 quattro, AUDI 80 Avant (8C5, B4) 2.8 quattro, AUDI 80 Avant (8C5, B4) RS2 quattro, AUDI 80 Avant (8C5, B4) 2.3 E quattro, AUDI 80 Avant (8C5, B4) 1.9 TDI, AUDI 80 Avant (8C5, B4) 1.6 E, AUDI 80 Avant (8C5, B4) 2.8, AUDI 80 Avant (8C5, B4) 2.0 E 16V quattro, AUDI 80 Avant (8C5, B4) 1.9 TD, AUDI 80 Avant (8C5, B4) 2.0 quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for 80 Avant (8C5, B4) and other AUDI models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 15
HEX bit No.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – AUDI 80 Avant (8C, B4). Tip from AUTODOC experts:
- Replace stabilizer links on AUDI 80 Avant (8C, B4) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI 80 Avant (8C, B4). Use the following procedure:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. AUDI 80 Avant (8C, B4)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench.
- Step 8Unscrew the stabilizer link upper fastening. Use a combination spanner #17. Use a drive socket #15. Use a ratchet wrench.
- Step 9Remove the stabilizer rod.Replacement: anti roll bar links – AUDI 80 Avant (8C, B4). Tip:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 11Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI 80 B4 Avant (8C5) model
Popular maintenance tutorials for Audi 80 B4 Avant
Complete guides for changing the Drop links on different AUDI 80 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI 80 Avant (8C5, B4)
View more
- Top 5 reasons why the suspension knocks | AUTODOC tips
- How to Fix P0401 ✅ error code Insufficient EGR flow
- How to repair a bumper yourself | AUTODOC tips
- Deep interior cleaning | Car transformation by detailing
Most commonly replaced car parts on AUDI 80
Time to replace parts? Get even better deals in our Shop app.

SCAN ME