When to replace the Brake Pads on your FORD FOCUS
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
FORD Focus C-Max (DM2) 2.0 TDCi, FORD Focus C-Max (DM2) 1.8, FORD Focus C-Max (DM2) 1.6 TDCi, FORD Focus C-Max (DM2) 2.0 TDCi, FORD Focus C-Max (DM2) 1.6, FORD Focus C-Max (DM2) 2.0, FORD Focus C-Max (DM2) 1.8, FORD Focus C-Max (DM2) 1.6 Ti, FORD Focus C-Max (DM2) 1.6 TDCi, FORD Focus C-Max (DM2) 1.8 TDCi, FORD Focus C-Max (DM2) 1.8 Flexifuel, FORD Focus C-Max (DM2) 1.8 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pads for Focus C-Max (DM2) and other FORD models
Tools
Replacement: brake pads – FORD FOCUS C-MAX. List of the tools you'll need:
Wire brush
Brake cleaner
Anti-squeal paste
Copper grease
HEX bit No.H7.
Wheel impact socket #19
Ratchet wrench
Torque wrench
Brake caliper wind back tool
Crow bar
Wheel chock
Replacement: brake pads – FORD FOCUS C-MAX. AUTODOC experts recommend:
  • Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
  • The replacement procedure is identical for all brake pads on the same axle.
  • All work should be done with the engine stopped.
Replacement: brake pads – FORD FOCUS C-MAX. Use the following procedure:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Brake Pads on Ford C-Max dm2 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace FORD Focus C-Max (DM2) 1.6 TDCi 2004 Brake Pads - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 4
    Raise the front of the car and secure on supports.
    Step 5
    Ford C-Max dm2 2.0 TDCi 2005 Brake Pads replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD FOCUS C-MAX
  4. Step 6
    Changing Brake Pads on FORD Focus C-Max (DM2) 1.6 2006 by yourself
    Remove the wheel.
  5. Step 7
    How to remove FORD FOCUS 1.8 2007 Brake Pads - online easy-to-follow instructions
    Spread the brake pads. Use a crowbar.
  6. Step 8
    How to replace Brake Pads on FORD Focus C-Max (DM2) 2003: download PDF manuals and video instructions
    Detach the brake caliper retaining spring. Use a crowbar.
  7. Step 9
    How hard is it to do yourself: Brake Pads replacement on Ford C-Max dm2 2.0 2004 - download illustrated guide
    Remove the dust boot caps of the brake caliper guide pins.
  8. Step 10
    Need to know how to renew Brake Pads on FORD FOCUS 2005? This free workshop manual will help you to do it yourself
    Unscrew the brake caliper fastening. Use HEX No.H7. Use a ratchet wrench.
  9. Step 11
    Changing of Brake Pads on Ford C-Max dm2 2006 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake caliper.
    Replacement: brake pads – FORD FOCUS C-MAX. AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  10. Step 12
    FORD FOCUS 2.0 TDCi Brake Pads replacement: online guides and video tutorials
    Remove the brake pads.
    Replacement: brake pads – FORD FOCUS C-MAX. Tip:
    Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
  11. Step 13
    Replacing Brake Pads on Ford C-Max dm2 2003 1.6 TDCi by yourself
    Press in the brake caliper piston. Use brake caliper wind back tool.
  12. Step 14
    Focus C-Max (DM2) 1.8 2004 Brake Pads DIY replacement workshop manual
    Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary. Use a wire brush. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: brake pads – FORD FOCUS C-MAX. After applying the spray, wait a few minutes.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus C-Max (DM2) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD Focus C-Max (DM2) Brake Pads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD Focus C-Max (DM2) Brake Pads replacement - online guide
Tips & tricks for your FORD Focus C-Max (DM2)
View more
  • How to change Brake pad set on FORD Focus C-Max (DM2) 1.8 TDCi - replacement tricks
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Changing Disc pads Ford C-Max dm2 1.6 TDCi - Replacement Tips
    How to restore wheel rims | AUTODOC tips
  • Maintenance Hacks - FORD Focus C-Max (DM2) 2.0 TDCi Brake pad kit replacement guide
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Replace Disc brake pads on Ford C-Max dm2 - free video tips
    How to paint a car with a spray can | AUTODOC tips