Disclaimer
How to change front anti roll bar links on TOYOTA PREVIA III (ACR5_, GSR5_) – replacement guide
downloads:
4
Views:
52
Important!
This replacement procedure can be used for:
TOYOTA PREVIA III (ACR5_, GSR5_) 2.4 Hybrid (AHR20_), TOYOTA PREVIA III (ACR5_, GSR5_) 3.5 4WD (GSR55W), TOYOTA PREVIA III (ACR5_, GSR5_) 3.5 (GSR50W, GSR50), TOYOTA PREVIA III (ACR5_, GSR5_) 2.4 (ACR50_), TOYOTA PREVIA III (ACR5_, GSR5_) 3.5 (GSR50_) … View more
The steps may slightly vary depending on the car design.
TOYOTA PREVIA III (ACR5_, GSR5_) 2.4 Hybrid (AHR20_), TOYOTA PREVIA III (ACR5_, GSR5_) 3.5 4WD (GSR55W), TOYOTA PREVIA III (ACR5_, GSR5_) 3.5 (GSR50W, GSR50), TOYOTA PREVIA III (ACR5_, GSR5_) 2.4 (ACR50_), TOYOTA PREVIA III (ACR5_, GSR5_) 3.5 (GSR50_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for PREVIA III (ACR5_, GSR5_) and other TOYOTA models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 17
Wheel impact socket #21
Torque wrench
Tap wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA PREVIA III (ACR5_, GSR5_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA PREVIA III (ACR5_, GSR5_). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. TOYOTA PREVIA III (ACR5_, GSR5_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a tap wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a tap wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – TOYOTA PREVIA III (ACR5_, GSR5_). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Previa / Estima III (XR50) model
Popular maintenance tutorials for TOYOTA PREVIA III (ACR5_, GSR5_)
Complete guides for changing the Drop links on different TOYOTA PREVIA / ESTIMA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA PREVIA III (ACR5_, GSR5_)
View more
2 ways to clean the EGR valve – which one is better?
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
What causes engine misfire? | AUTODOC
Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
Most commonly replaced car parts on TOYOTA PREVIA / ESTIMA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















