Disclaimer
How to change front anti roll bar links on SUZUKI SPLASH – replacement guide
downloads:
9
Views:
86
Important!
This replacement procedure can be used for:
SUZUKI Splash Hatchback 1.2 VVT (A5B 412), SUZUKI Splash Hatchback 1.0 (A5B 310), SUZUKI Splash Hatchback 1.2 VVT (A5B 412), SUZUKI Splash Hatchback 1.0 (A5B 310), SUZUKI Splash Hatchback 1.2 (A5B 412), SUZUKI Splash Hatchback 1.3 CDTI (A5B 413D), SUZUKI Splash Hatchback 1.2 VVT (A5B 412), SUZUKI Splash Hatchback 1.2, SUZUKI Splash Hatchback 1.2 LPG … View more
The steps may slightly vary depending on the car design.
SUZUKI Splash Hatchback 1.2 VVT (A5B 412), SUZUKI Splash Hatchback 1.0 (A5B 310), SUZUKI Splash Hatchback 1.2 VVT (A5B 412), SUZUKI Splash Hatchback 1.0 (A5B 310), SUZUKI Splash Hatchback 1.2 (A5B 412), SUZUKI Splash Hatchback 1.3 CDTI (A5B 413D), SUZUKI Splash Hatchback 1.2 VVT (A5B 412), SUZUKI Splash Hatchback 1.2, SUZUKI Splash Hatchback 1.2 LPG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Splash Hatchback and other SUZUKI models
Alternative products

Wire brush
WD-40 spray
Copper grease
Combination spanner #14
HEX bit no.H6.
Wheel impact socket #21
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on SUZUKI SPLASH in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – SUZUKI SPLASH – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. SUZUKI SPLASH - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #14. Use HEX No.H6. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #14. Use HEX No.H6. Use a ratchet wrench. - Step 9
Remove the stabilizer rod. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SUZUKI Splash Hatchback model
Popular maintenance tutorials for SUZUKI SPLASH
Complete guides for changing the Drop links on different SUZUKI SPLASH models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SUZUKI Splash Hatchback
View more
Coolant comparison test | AUTODOC
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
Don’t Replace, Restore: Fixing Damaged Threads at Home
Petrol or diesel: The engine showdown! | AUTODOC
Most commonly replaced car parts on SUZUKI SPLASH
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

















