
Disclaimer
How to change front anti roll bar links on RENAULT KOLEOS (HY_) – replacement guide
downloads:
5
Views:
62
Important!
This replacement procedure can be used for:
RENAULT KOLEOS (HY_) 2.5 4x4 (HY0C, HY0N), RENAULT KOLEOS (HY_) 2.5 (HY0C, HY0N), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 (HY0B), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 (HY0K), RENAULT KOLEOS (HY_) 2.0 dCi (HY0K) … View more
The steps may slightly vary depending on the car design.
RENAULT KOLEOS (HY_) 2.5 4x4 (HY0C, HY0N), RENAULT KOLEOS (HY_) 2.5 (HY0C, HY0N), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 (HY0B), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 (HY0K), RENAULT KOLEOS (HY_) 2.0 dCi (HY0K) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for KOLEOS (HY_) and other RENAULT models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #17
Combination spanner #19
Combination spanner #21
Drive socket # 19
Drive socket # 21
Wheel impact socket #21
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – RENAULT KOLEOS (HY_). Tip from AUTODOC experts:
- Replace the stabiliser links on RENAULT KOLEOS (HY_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – RENAULT KOLEOS (HY_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #21.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: anti roll bar links – RENAULT KOLEOS (HY_). Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #21. Use a ratchet wrench.
- Step 8Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #17. Use a combination spanner #21.
- Step 9Remove the stabilizer rod.Replacement: anti roll bar links – RENAULT KOLEOS (HY_). AUTODOC recommends:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Koleos I (HY) model
Popular maintenance tutorials for Renault Koleos 1
Complete guides for changing the Drop links on different RENAULT KOLEOS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT KOLEOS (HY_)
View more
- Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
- Top 7 signs of a bad starter
- How to get your motorcycle ready for spring
- Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
Most commonly replaced car parts on RENAULT KOLEOS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME