
Disclaimer
How to change track rod end on RENAULT KOLEOS (HY_) – replacement guide
downloads:
6
Views:
56
Important!
This replacement procedure can be used for:
RENAULT KOLEOS (HY_) 2.0 dCi (HY0K), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 (HY0K), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 (HY0B), RENAULT KOLEOS (HY_) 2.5 (HY0C, HY0N), RENAULT KOLEOS (HY_) 2.5 4x4 (HY0C, HY0N), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 … View more
The steps may slightly vary depending on the car design.
RENAULT KOLEOS (HY_) 2.0 dCi (HY0K), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 (HY0K), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 (HY0B), RENAULT KOLEOS (HY_) 2.5 (HY0C, HY0N), RENAULT KOLEOS (HY_) 2.5 4x4 (HY0C, HY0N), RENAULT KOLEOS (HY_) 2.0 dCi 4x4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Track Rod End for KOLEOS (HY_) and other RENAULT models
Track rod end
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #19
Combination spanner #22
Drive socket # 16
Drive socket # 17
Wheel impact socket #21
Ratchet wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – RENAULT KOLEOS (HY_). AUTODOC recommends:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- All work should be done with the engine stopped.
Replacement: track rod end – RENAULT KOLEOS (HY_). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #21.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT KOLEOS (HY_)
- Step 5Remove the wheel.
- Step 6Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a tap wrench.
- Step 8When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
- Step 9Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
- Step 10Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
- Step 11Screw the end out of the tie rod.
- Step 12Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
- Step 13Screw on a new tie rod end.Replacement: track rod end – RENAULT KOLEOS (HY_). Professionals recommend:While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
- Step 14Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Koleos I (HY) model
Popular maintenance tutorials for Renault Koleos 1
Complete guides for changing the Tie rod end on different RENAULT KOLEOS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT KOLEOS (HY_)
View more
- Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
- Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
- Top 5 car noises you shouldn't ignore
- 5 more brake repair mistakes | Stop making these brake repair mistakes
Most commonly replaced car parts on RENAULT KOLEOS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME