Important!
This replacement procedure can be used for:
MERCEDES-BENZ VITO Box (638) 108 CDI 2.2 (638.094), MERCEDES-BENZ VITO Box (638) 110 CDI 2.2 (638.094), MERCEDES-BENZ VITO Box (638) 112 CDI 2.2 (638.094) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for VITO Box (638) and other MERCEDES-BENZ models
Tools
Replacement: anti roll bar links – MERCEDES-BENZ VITO Box (638). Tools you need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 16
Combination spanner #16
Wheel impact socket #17
Torque wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on MERCEDES-BENZ VITO Box (638) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ VITO Box (638). Recommended sequence of steps:
  1. Step 1
    How to change Anti Roll Bar Links on Mercedes Vito W638 1997 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace MERCEDES-BENZ VITO Box (638) 112 CDI 2.2 (638.094) 1998 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Mercedes Vito W638 110 CDI 2.2 (638.094) 1999 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ VITO Box (638)
  4. Step 5
    Changing Anti Roll Bar Links on MERCEDES-BENZ VITO Box (638) 108 CDI 2.2 (638.094) 2000 by yourself
    Remove the wheel.
  5. Step 6.1
    How to remove MERCEDES-BENZ VITO 108 D 2.3 (638.064, 638.068) 2001 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners.
    Step 6.2
    How to replace Anti Roll Bar Links on MERCEDES-BENZ VITO Box (638) 2002: download PDF manuals and video instructions
    Use a wire brush. Use WD-40 spray.
  6. Step 7
    How hard is it to do yourself: Anti Roll Bar Links replacement on Mercedes Vito W638 114 2.3 (638.034, 638.094) 2003 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #16.
  7. Step 8
    Need to know how to renew Anti Roll Bar Links on MERCEDES-BENZ VITO 1997? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use a drive socket #16.
  8. Step 9
    Changing of Anti Roll Bar Links on Mercedes Vito W638 1998 won't be an issue if you follow this illustrated step-by-step guide
    Remove the stabilizer rod.
    Replacement: anti roll bar links – MERCEDES-BENZ VITO Box (638). Tip from AUTODOC:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    MERCEDES-BENZ VITO 110 CDI 2.2 (638.094) Anti Roll Bar Links replacement: online guides and video tutorials
    Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Vito Van (W638) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ VITO Box (638) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ VITO Box (638) Anti Roll Bar Links replacement - online guide
Tips & tricks for your MERCEDES-BENZ VITO Box (638)
View more
  • How to change Drop links on MERCEDES-BENZ VITO Box (638) 110 D 2.3 (638.074, 638.078) - replacement tricks
    Top 5 tips to prevent car rust | AUTODOC tips
  • Changing Stabilizer link Mercedes Vito W638 112 CDI 2.2 (638.094) - Replacement Tips
    The most common problems when buying a used car | AUTODOC
  • Maintenance Hacks - MERCEDES-BENZ VITO Box (638) 110 CDI 2.2 (638.094) Sway bar link replacement guide
    How to check your head gasket | AUTODOC
  • Replace Drop link on Mercedes Vito W638 - free video tips
    What to do if the TPMS light is on | AUTODOC tips