Important!
This replacement procedure can be used for:
MERCEDES-BENZ VITO / MIXTO Box (W639) 110 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 113 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 116 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 122 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 115 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 119 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 122 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 109 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI (639.601, 639.603), MERCEDES-BENZ VITO / MIXTO Box (W639) 120 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 115 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 126 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 109 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 123 (639.601) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for VITO / MIXTO Box (W639) and other MERCEDES-BENZ models
Alternative products
How to change Anti-roll bar link on Mercedes Vito Mixto W639 115 CDI (639.601, 639.603, 639.605) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – MERCEDES-BENZ VITO / MIXTO Box (W639). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Torx bit T40
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on MERCEDES-BENZ VITO / MIXTO Box (W639) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ VITO / MIXTO Box (W639). Recommended sequence of steps:
  1. Step 1
    How to change Anti Roll Bar Links on Mercedes Vito Mixto W639 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace MERCEDES-BENZ VITO / MIXTO Box (W639) 115 CDI (639.601, 639.603, 639.605) 2004 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Mercedes Vito Mixto W639 111 CDI (639.601, 639.603, 639.605) 2005 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ VITO / MIXTO Box (W639)
  4. Step 5
    Changing Anti Roll Bar Links on MERCEDES-BENZ VITO / MIXTO Box (W639) 113 CDI (639.601, 639.603, 639.605) 2006 by yourself
    Remove the wheel.
  5. Step 6
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove MERCEDES-BENZ VITO 109 CDI (639.601, 639.603, 639.605) 2007 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use Torx T40. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on MERCEDES-BENZ VITO / MIXTO Box (W639) 2008: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use Torx T40. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Mercedes Vito Mixto W639 110 CDI (639.601, 639.603, 639.605) 2009 - download illustrated guide
    Remove the stabilizer rod.
    Replacement: anti roll bar links – MERCEDES-BENZ VITO / MIXTO Box (W639). Tip from AUTODOC:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on MERCEDES-BENZ VITO 2010? This free workshop manual will help you to do it yourself
    Install a new rod, tighten the fasteners.
  9. Step 11
    Changing of Anti Roll Bar Links on Mercedes Vito Mixto W639 2011 won't be an issue if you follow this illustrated step-by-step guide
    Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use Torx T40. Use a torque wrench. Tighten it to 85 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Vito Mixto (W639) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MERCEDES-BENZ VITO / MIXTO Box (W639) Anti Roll Bar Links replacement - online guide
Tips & tricks for your MERCEDES-BENZ VITO / MIXTO Box (W639)
View more
  • How to change Drop links on MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI (639.601, 639.603) - replacement tricks
    Top 5 possible reasons your car is shaking or vibrating
  • Changing Stabilizer link Mercedes Vito Mixto W639 115 CDI (639.601, 639.603, 639.605) - Replacement Tips
    DIY starter repair | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI (639.601, 639.603, 639.605) Sway bar link replacement guide
    How to Get the Best Deals on Car Parts | Save Money with AUTODOC
  • Replace Drop link on Mercedes Vito Mixto W639 - free video tips
    Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MERCEDES-BENZ VITO / MIXTO Box (W639) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME